Search:

WORLDWIDE SHIPPING! OPENING HOURS: MON - SAT 10AM to 4.30PM / 10AM to 4PM SUN & Bank Holidays

Choose a category...

Welcome to Kernow Model Rail Centre / Call our team on 01209 714099 for all enquiries & orders / Post Free UK Orders over £250. More details >>>

Basket

0 x item(s)

Compare Products

1 selected product

PL51 Peco Lectrics Turnout Switch Module Add on

Clear All

Other Gauges > Non Gauge Specific > Power, Controllers, Point Motors

Click an image to enlarge.

PL51 Peco Lectrics Turnout Switch Module Add on

by PECO

Add To Comparison

PL51 Peco Lectrics Turnout Switch Module Add on.

This carefully designed system provides all the electrical connections required for the PL-26 Passing Contact Switch, and for the other switches in the Pecolectrics range (see below) and makes provision for linking the wires without the use of a soldering iron.

Controlling turnout operation

1. Plug your PL-26 switch into the recess on top of the module.

2. Connect each turnout motor (in the PL-10 family) to the module using wire, clamping the wire in the unit by depressing the spring-loaded green plunger. Be careful to ensure that the common return wire is plugged into the central 'green' hole. You can connect your wires to the turnout motor using the PL-31 Push-On Connectors & Shrouds, or by using the PL-34 Wiring Loom (see below). The Peco PL-11 Side mounted Turnout Motor comes ready wired!

3. The module comes complete with blue & yellow wires ready to connect to your transformer (16vAC supply).

And away you go! You have 3 switch units supplied with the PL-50, and can extend the number of units required by adding PL-51 Add-on Units to the module. Each unit simply plugs into the unit alongside, and is neatly finished off with the end caps. The whole module in turn can be secured to a surface by using screws, holes for which are incorporated within the module. Full instructions are supplied.

Versatility

This system, whilst designed for use with Peco PL-26 Passing Contact Switches for turnout operation, can also be used with the other matching switches in the Pecolectrics family. You can use the PL-22 Single Pole On-Off Switch and PL-23 On-On Changeover Switch with this system, but you must remember not to mix switches within one module. This is because you will most probably be using different power sources for these types of switches, and the underside connections on the switches differ from those of the PL-26. So, for example, you can have a block of PL-26 switches controlling your turnouts, another block for accessories such as signals using the PL23 Changeover Switch, and another block for the PL-22 On-Off Switch for isolating track sections.

The Pecolectrics system - everything you need.

By incorporating this new system with the other Pecolectrics accessories you can be up and running very easily.

PL-34 Turnout Wiring Loom - plug into your PL-10 motor, connect the loom to the Switch Module.

PL-38 Electrical Wire - available in 5 colours - to link your motors and modules, or use to extend the Wiring Loom

PL-39 Screw Terminal Blocks - safely connect wires together so you can always reach where you need to be!

PL-37 Cable Clips - secure all the wires out of the way under the baseboard by using these self adhesive clips.

The Pecolectrics system provides you with quality components that are easy to use and help take the worry out of getting your layout truly controlable, and without the worry of perfecting the use of a soldering iron