WORLDWIDE SHIPPING!  OPENING HOURS: MON - SAT 10AM to 4.30PM / 10AM to 4PM SUN & Bank Holidays

Choose a category...
Welcome to Kernow Model Rail Centre  /   Call our team on 01209 714099 for all enquiries & orders  /   Post Free UK Orders over £250. More details >>>

0 x item(s)

21 selected products
  • 0401 Slaters Plastikard 4mm Brick Red
  • 5413 WSL Busch Christmas Tree
  • 942006 WSL Rapido Wagon Pack 2 - SR Pre 1936 Livery
  • TFS-6 Plastruct Fineline Tees
  • 0438 Slaters Plastikard 4mm Roof Tile Scalloped
  • 2D-087-003 Dapol Class 87/0 Electric Loco 87 035 Robert Burns
  • HL-K-05 Proses 4 X Cable Drums (Kit)
  • M0051 Metcalfe Cobble Stones
  • RT-OO-IHA-401C WSL Revolution Trains IHA/Sfhimmns Steel Carrier
  • C8228 Scalextric Radius 2 Curve Outer Borders 45° x 4
  • 252 Ratio Viaduct Extension Kit
  • LM-PP.2 DCC Concepts Legacy Models PowerPoint Baseboard Dowels
  • 37-577B Bachmann BR 45T TTA Tank Wagon 67391 - Shell-BP wthd
  • K2600-11 D600 Class 41 Warship Diesel iron lamps
  • LS-009 Proses HO-OO Double Engine Loco Shed Laser-Cut Kit
  • CB-8261-2 Proses 10 X Pre-Cut Cork Bed for R8261-8262 R4 Curve T
  • MS-1619 Plastruct Rectangular 4 x 4.8mm
  • D-002 Proses 6 pcs 36X23mm 6 Lite Dbl Unit Garage Doors HO/OO
  • 38-128A Bachmann BR VAA Van BR Railfreight Red & Grey
  • 59029 ESU LokPilot 5 Basic DCC 21 Pin wire Wire Harness
  • LML-VPSBK DCC Concepts Swan-Neck Lamps Value Pack - Black

59029 ESU LokPilot 5 Basic DCC 21 Pin wire Wire Harness

by ESU

Add To Comparison

59029 ESU LokPilot 5 Basic, DCC, 21 Pin, wire Wire Harness

While LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable.

The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price.

The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.

Modes

The LokPilot 5 Basic is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.

It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.

The LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.

Functions

The LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately.

Motor

The motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor.

Operational reliability

On request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts.

Protection

Of course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.

Name:
59029 ESU LokPilot 5 Basic DCC 21 Pin wire Wire Harness
Price:
£ 27.71
Product Code:
VOX001
Availability:
Temporarily out of stock - usually despatched within 28 days
Stock Level:
0
Brands
None Deliverable