SLU8361 Peco Code 83 Right Hand No.6 Unifrog Turnout

by PECO

SLU8361 Peco Code 83 Right Hand No.6 Unifrog Turnout.

The wiring of these new turnouts is a development of both the Insulfrog and Electrofrog designs.

PECO say "For current users of the Electrofrog or Insulfrog versions of our turnouts the new Unifrog gives modellers the best of both worlds. As supplied, the turnout is wired completely “live”, except for the frog tip and wing rails, and can be used straight out of the packet without any further modification (and so behaves like an Insulfrog).
The stock rails are wired to the closure rails at the factory, which in turn are connected to the corresponding point rail. This means the turnout is completely live (except for the tip of the frog), no extra wiring required. If the turnout is being used as a switch to isolate a section of track then it is simple job to remove the wire that joins the closure rail and stock rail and it will work like a current Insulfrog.
Peco provides a pair of pigtails to allow wiring the turnout to behave like an Electrofrog. (They have been spot welded onto the appropriate places.)To change frog polarity the PL-13 or PL-15 change-over switch/microswitch, or the SmartSwitch SmartFrog PLS-130 with do the task"