WORLDWIDE SHIPPING!  OPENING HOURS: MON - SAT 0930 to 1700 / 1000 to 1600 SUN & Bank Holidays

Choose a category...
Welcome to Kernow Model Rail Centre  /   Call our team on 01209 714099 for all enquiries & orders  /   Post Free UK Orders over £250. More details >>>

0 x item(s)

16 selected products
  • C8510 Scalextric Sport Track Extension Pack 1
  • 42-170 Graham Farish Scenecraft Shillingstone Good Shed
  • A2983 Woodland Scenics HO Chain Link Fence
  • 120MM015 Oxford Diecast Morris 1000 Royal Mail
  • A2522 Woodland Scenics Checker Players and Hound
  • W-001 Proses 10 pcs 18X16mm 12 Pane Laser-Cut Windows HO/OO
  • SS21 Wills Hoardings with Bill Poster
  • 56610 Noch Red Brick 3D Cardboard Sheet 25x12.5cm
  • 926010 Rapido USATC S160 No.5197 - Black as Preserved
  • 967408 Rapido SECR D1357 7 Plank Wagon SR (pre-1936) No.17065
  • 763CX003 Oxford Diecast JCB Eco Backhoe Loader 70th Anniversary
  • PKHK01F005 HK Models Avro Lancaster B Mk1
  • 78502 WSL Bachmann Magnetic Operated EZ Mate Mark II Couplers
  • 7F-037-101 Dapol Conflat number 36508 in GWR Grey livery
  • 373-600D Graham Farish BR VGA Van EWS
  • 59827 ESU LokPilot 5 Micro DCC 6 Pin Direct Plug

59827 ESU LokPilot 5 Micro DCC 6 Pin Direct Plug

by ESU

Add To Comparison

59827 ESU LokPilot 5 Micro, DCC, 6 Pin, Direct Plug

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price.

LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of 13.0mm x 9.2mm, but have 2 additional function outputs.

Modes

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

It masters all DCC programming command stations. Auxiliary registers exist for DCC systems that can only program CVs from 1-255.

The LokPilot 5 micro DCC decoder recognizes the Märklin® braking sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately.

The decoder switches between the operating modes fully automatically "on-the-fly".

Features

We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5 micro DCC equipped with an amazing number of function outputs. The variants with 6-pin or 8-pin Wiring harnesses offer 4 amplified function outputs, each with 180mA output current and two logic level outputs. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs available. All important lighting effects are available. The brightness of each output can be adjusted separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO®, Krois® and Telex® couplings.

Motor control

The motor control of the LokPilot 5 micro DCC has been fundamentally improved again. A variable adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors- The typical “hum” is a thing of the past. The load control now has up to 10 CVs  which can be adjusted for difficult cases. The unique "Autotune" function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

Safety

A PowerPack to bypass dirty track can be fitted to the LokPilot 5 micro.

Protection

Of course, the motor output and the function outputs are against overload protected. We want you to enjoy your decoder for as long as possible.

Name:
59827 ESU LokPilot 5 Micro DCC 6 Pin Direct Plug
Price:
£ 37.13
Product Code:
CLU001
Availability:
Temporarily out of stock - usually despatched within 28 days
Stock Level:
0
Brands
None Deliverable