WORLDWIDE SHIPPING!  OPENING HOURS: MON - SAT 10AM to 4.30PM / 10AM to 4PM SUN & Bank Holidays

Choose a category...
Welcome to Kernow Model Rail Centre  /   Call our team on 01209 714099 for all enquiries & orders  /   Post Free UK Orders over £250. More details >>>

0 x item(s)

18 selected products
  • 31-034SF Bachmann Class 350/3 4-Car EMU 350372 LNWR
  • VA06521 Corgi Vanguards Rover P6 3500 V8 Richlieu Red
  • AC5601 # Humbrol 28 ml Matt Cote varnish
  • 44-0208 Bachmann Scenecraft Low Relief Dacre Arms Pub
  • GR320 Peco 2 Ton Slate Wagons in Grey livery - unbraked
  • K9927 Class 33 x 2 + 4-TC Thames Tamar Express Pack
  • B24 Superquick Greystones Farm House
  • 58818.S0170 WSL ESU LokSound V5 Micro Next18 Decoder Cl 03
  • SB008 - 28 Kernow Models IZA Cargowaggon Spare Part - Hand brake
  • 51944 ESU Super Thin Cable 0.5mm Diameter AWG36 10m Orange
  • 15590 Noch Parents and Children
  • 57700 Noch Granite Wall Card 64x15cm
  • GR911 Peco Christmas 2024 Box Van - Christmas Jumper Department
  • TSOO83 Tiny Signs Enamel Advert Signs Pack 3
  • 35-823 Bachmann Class 31/1 Refurbished 31319 BR Railfreight
  • ST18 Peco Setrack 4th Radius Standard Curve
  • 60850 Noch Lake Film 41x26cm
  • 58416 ESU LokSound 5 DCC/MM/SX/S4 Blank Decoder 6 Pin NEM651

58416 ESU LokSound 5 DCC/MM/SX/S4 Blank Decoder 6 Pin NEM651

by ESU

Add To Comparison

58416 ESU LokSound 5, DCC/MM/SX/S4, Blank Decoder, 6 Pin, NEM651, with 11mmx15mm Speaker

The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive.

LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure.

The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.

Operating modes

Like all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.

The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

Sound

The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.

The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.

Functions

We are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.

Motor control

Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.

LokSound 5 DCC

The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

Name:
58416 ESU LokSound 5 DCC/MM/SX/S4 Blank Decoder 6 Pin NEM651
Price:
£ 98.95
Product Code:
PGN002
Availability:
Temporarily out of stock - usually despatched within 28 days
Stock Level:
0
Brands
None Deliverable