WORLDWIDE SHIPPING!  OPENING HOURS: MON - SAT 10AM to 4.30PM / 10AM to 4PM SUN & Bank Holidays

Choose a category...
Welcome to Kernow Model Rail Centre  /   Call our team on 01209 714099 for all enquiries & orders  /   Post Free UK Orders over £250. More details >>>

0 x item(s)

12 selected products
  • 58490 Noch Limestone Rock Wall Hard Foam 32x18cm
  • 372-727BSF Graham Farish BR Standard 5MT with BR1B Tender 73100
  • K2600-38R D600 Class 41 Warship Diesel chassis block Red
  • 15886 Noch Paragliders (2) Figure Set
  • 61234 Noch Mittagsspitze Rock Former (1 Medium/2 Small Rocks)
  • K2600-59 Small D600 Class 41 Warship Diesel gears
  • DML-CTK DCC Concepts Modern Station CCTV Camera Kit
  • OWTS-6 Plastruct Fineline Open Web Truss
  • LED-NLAM DCC Concepts NANO LED Amber
  • MS-1025 Plastruct Rectangular 2.5 x 6.4mm
  • 35-359SF Bachmann Class 20/0 Headcode Box D8308 BR Blue
  • 53900 ESU Decoder Tester
53900 ESU Decoder Tester
Click an image to enlarge.

53900 ESU Decoder Tester

by ESU

Add To Comparison

53900 ESU Decoder Tester

Perhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how to do this?

The Profi Decoder tester makes it easy for you: simply connect the tester to your command station or the LokProgrammer. It enables you to test any decoder without exposing it to any external factors caused by the locomotive that may influence its performance.

Features

In order to make things as easy as possible for you, the Profi Decoder Tester is equipped with some useful features. It has all commonly used interface sockets for connecting a decoder for the smaller scale models:

Besides a 6-pole NEM 651 socket and the 8-pole NEM 652 socket, it also has an 21MTC interface as per NEM 660, a PluX22 socket as well as a Next18 interface: No matter which type of decoder you have: Simply plug it in – it will fit! And that’s all there is to it!

Decoders without any interface can be contacted with individual terminals. 

A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output: Thus it is quite easy to check on the low speed performance and the even speed of the decoder. An LED monitor informs you about the functioning of the headlights and back-up lights as well as the function outputs AUX1 through AUX6.

For testing LokSound decoders we have integrated a 20 mm speaker. You may choose if the integral speaker should be switched off or if it should have 100 Ohm respectively 16 Ohm – thus the Decoder Tester is perfectly suitable for any ESU decoder generation!

Two SUSI plugs facilitate the direct test of optional SUSI modules as well as the connection to another circuit board.

The electrical connection to either the command station or the LokProgrammer is facilitated by a removable, 2-pole terminal block (same system as used on the LokProgrammer and the ECoS) or via two solder points.

Extension

Now there is an extension board that enables you to also connect our large scale decoders to the Decoder Tester. With this vast range of components your Profi Decoder Tester will soon be an indispensable aid in your workshop!

Name:
53900 ESU Decoder Tester
Price:
£ 42.40
Product Code:
FDE001
Availability:
Temporarily out of stock - usually despatched within 28 days
Stock Level:
0
Brands
None Deliverable