Login
Search:
WORLDWIDE SHIPPING!  OPENING HOURS: MON - SAT 10AM to 4.30PM / 10AM to 4PM SUN & Bank Holidays

Choose a category...
Welcome to Kernow Model Rail Centre  /   Call our team on 01209 714099 for all enquiries & orders  /   Post Free UK Orders over £250. More details >>>
Basket

0 x item(s)

Compare Products
44 selected products
  • 58513 ESU LokSound 5 XL DCC/MM/SX/S4 Blank Decoder
  • 371-862 Graham Farish Class 158 2-Car DMU 158856 Central Trains
  • 7D-011-002S WSL Dapol Streamlined Railcar number 10 GWR
  • PSG21 WSL Pecoscene Tuft Strips 4mm Daffoldils (10)
  • NLRL003 Oxford Diecast Land Rover Lightweight - Royal Air Force
  • 958004 Rapido LNER J52/2 No.4226 LNER Black with Red Lining
  • GM1900 Gaugemaster Grey Granite Ballast N 250g
  • FS773 Woodland Scenics Red Flowering Tufts
  • DA6 Springside Guards Van Lamps (Black) (Pack of 5)
  • C1258 Woodland Scenics Scale Wall Concrete
  • 2P-004-016 Dapol Autocoach number 189 in GWR Brown livery
  • 4967 WSL Heljan MK1 BG BR unlined Crimson E80638 (BR1)
  • GM2210403 Dapol Class 153 Sprinter DMU number 153 377 ScotRail
  • 58055 Noch Extra Long Wall Profi Hard Foam 67 x 12.5cm
  • 36-006B Bachmann Thompson Bogies
  • 950013 Rapido LNWR D90 4-Plank Open - No.48166 LNWR Loco Coal
  • 2S-034-006 Dapol West Country ‘Exeter’ 34001 BR Green
  • 7F-047-006 WSL Dapol HEA Coal Hooper Wagon 360620 Mainline
  • 16809 Noch two kayaks and kayakers
  • FC1639 Woodland Scenics Forest Blend Underbrush Shaker
  • ACC2228 Accurascale Magnetic Dellner Coupling Pack - 8 Couplings
  • R8097 Hornby Disc 3 holed Wheels
  • 24-000 Kato Unitrack Rerailer
  • 950016 Rapido LNWR D90 4-Plank Open - No.256069 LMS Bauxite
  • DA94 Springside 2 Girls with hoop and rope
  • NR307 Peco CDA China Clay Wagon - DB Cargo
  • 958003 Rapido LNER J52/2 No.1228 LNER Black with Red Lining
  • 7066 Slaters BR Insulated Van Kit
  • 36-015 Bachmann Metal 3 hole disc wagon wheels
  • R7196 WSL Hornby Lichen - Autumn Mix
  • NR202B WSL Peco Wagon Loads Blue Bricks
  • 9404 Heljan BR Mk1 CCT in BR Breakdown Train Yellow livery
  • NR604 Peco Wagon Load Kit - Granite
  • C1257 Woodland Scenics Double Tunnel Mouth Cut Stone
  • 15953 Noch Lovers in action on office desk
  • 959012 Rapido GNoSR F Class No.49 'Gordon Highlander' - Green
  • 2S-020-008D Dapol B17 Easterling Set - 61669 - BR early emblem
  • 959005 Rapido GNoSR V Class No.6834 - LNER Apple Green
  • K2600-38B D600 Class 41 Warship Diesel chassis block Black
  • M0058 Metcalfe Semi-Cut Stone B1 Card Sheets
  • K2600-59 Medium D600 Class 41 Warship Diesel gears
  • GM2210601 Dapol Class 33/0 Diesel Locomotive 33 021 Eastleigh
  • 7F-056-032 WSL Dapol Standard Plywood Van Brewdog Elvis Juice
  • R8249 Hornby DCC Locomotive Decoder 8 Pin
Clear All
Click an image to enlarge.

R8249 Hornby DCC Locomotive Decoder 8 Pin

Add To Comparison

R8249 Hornby DCC Locomotive Decoder with four functions.

The Hornby locomotive decoders may be used with all standard digital control equipment that conforms to the NMRA standards.

  • Control of the motor’s rotational speed (load compensation)
  • Acceleration and deceleration separately adjustable
  • Selectable for operation with 14, 28, 128 speed steps
  • Programming on main track
  • Four On/Off function outputs.Two of the function outputs are dedicated for the head / tail lights.
  • Operation on standard DC systems (analogue operation) possible
  • Motor overload current protection
  • With NMRA RP-9.1.1 / NEW652 medium plug
Technical Specification

Maximum current carrying capacity of the decoder in sum

1A

 

Rated continuous current output in sum

500mA

 

Continuous motor output current

500mA

 

Function output current

100mA each

 

Address

CV 1
CV 17-18

1-127
1-9999

Speed Steps (Selectable)

14, 28, 128

 

Dimensions

17 x 10 x 3.5mm

 

 

List of supported CVs
CV NameCVDefaultDescription

Primary Address

1

3

Bits 0-6 contain an address with a value between 1 and 127. Bit seven must have a value of "0". If the value of Configuration Variable #1 is "00000000" then the decoder will go out of NMRA digital mode and convert to the alternate power source as defined by Configuration Variable #12.

Acceleration Rate

3

5

Determines the decoder's acceleration rate.The formula for the acceleration rate shall be equal to (the contents of CV#3*.896) /(number of speed steps in use).

Deceleration Rate

4

5

Determines a decoders braking rate.

Manufacturer Version No.

7

13

Manufacturer defined version info

Manufacturers ID

8

48

Values assigned by NMRA

EMF Feedback Cutout

10

128

Contains a value between 1 and 128 that indicates the speed step above which the back EMF motor control cuts off.

Extended Address

17-18

 

The Extended Address is the locomotives address when the decoder is set up for extended addressing (indicated by a value of "1" in bit location 5 of CV#29). CV#17 contains the most significant bits of the two byte address and must have a value between 11000000 and 11100111, inclusive, in order for this two byte address to be valid. CV 18 contains the least significant bits of the address and may contain any value.

Configuration Data #1

29

 

Decoder Configuration byte 1
Bit 0 = Locomotive Direction: "0" = normal, "1" = reversed.This bit controls the locomotive's forward and backward direction in digital mode only. Directional sensitive functions, such as headlights (FL and FR), will also be reversed so that they line up with the locomotive's new forward direction.
Bit 1 = FL location: "0" = bit 4 in Speed and Direction instructions control FL, "1" = bit 4 in function group one instruction controls FL.
Bit 2 = Power Source Conversion: "0" = NMRA Digital Only, "1" = Power Source Conversion Enabled.
Bit 5 = "0" = one byte addressing, "1" = two byte addressing (also known as extended addressing).

All the CVs shown can be programmed in Operating Mode, Register CV Mode, Paged CV Mode and Direct CV Mode. All the CVs shown can be interrogated in all service modes. The Hornby Decoder supports programming on the Main. Some advice on the current draw of the decoder output: The current for all the decoder outputs is supplied by an internal rectifier with a maximum current of 1 Amp and the rated continuous current is 500mA.The sum of all currents to the motor and the function outputs should not exceed 500mA at normal continuous operation and cannot exceed 1 Amp. If the motor current exceeds 500mA the decoder will automatically cut off power to the motor. Function outputs are not protected. Each individual output can only draw up to it’s limit. For example if a motor requires as much as 400mA continuously then the function outputs combined should not exceed 100mA. Therefore, if the directional headlights require 50mA then the load Function 1 and Function 2 should not exceed 50mA.

Name:
R8249 Hornby DCC Locomotive Decoder 8 Pin
Price:
£ 12.99 Saving £14.00 (51.87%) on RRP (£26.99)
Product Code:
10011377
Availability:
In Stock - usually despatched within 24 hours
Stock Level:
38
Brands
None Deliverable