{"product_id":"dct-snd-12-dcc-concepts-screw-and-nut-driver-set","title":"DCT-SND.12 DCC Concepts Screw and Nut Driver Set","description":"\u003cp\u003eDCT-SND.12 DCC Concepts Screw and Nut Driver Set\u003c\/p\u003e  \u003cdiv class=\"\" desc\u003e  \u003cp\u003eThree Handles, Three essential (-) type screwdriver tips, 3 essential (+) type screwdriver tips and 3 important Nut Drivers for use with model railways and similar hobbies.\u003c\/p\u003e  \u003ch4\u003eHave you ever wondered why some modellers keep using the same tools, year in, year out, while others always seem to need to buy replacements?\u003c\/h4\u003e  \u003cp\u003eThis usually happens because with ALL tools, there is a “right or wrong” way to use them to make sure they last!\u003c\/p\u003e  \u003ch4\u003eThe Handles\u003c\/h4\u003e  \u003cp\u003eThey are made from tough alloys and have been anodised to prevent corrosion. They will rarely ever wear out, but basic care will keep them in perfect condition.\u003c\/p\u003e  \u003cp\u003eWipe them down after use, especially if you are soldering or using them near strong chemicals.\u003c\/p\u003e  \u003cp\u003eOil the rotating “Palm Pad” occasionally so that it rotates easily when you are removing and tightening screws.\u003c\/p\u003e  \u003ch4\u003eThe Tips\u003c\/h4\u003e  \u003cp\u003eAll of our Screwdriver and Nut Driver tips are hardened, but excessive force OR using the wrong size tip for the job you are doing can still cause wear or damage them.\u003c\/p\u003e  \u003cp\u003eChoose the correct size tip carefully: This is important because the screws and nuts in today’s models are NOT usually hardened. While the screwdriver tip MAY not be damaged if you do not match the screw and the driver tip you choose, the screw itself will very often be quite badly damaged by any significant mis-matching.\u003c\/p\u003e  \u003cp\u003ePack contents:\u003cbr\u003e1x 1.5mm slot\u003cbr\u003e1x 2mm slot\u003cbr\u003e1x 2.5mm slot\u003cbr\u003e1x PH00\u003cbr\u003e1x PH0\u003cbr\u003e1x PH1\u003cbr\u003e1x 2mm hex nut\u003cbr\u003e1x 2.5mm hex nut\u003cbr\u003e1x 3mm hex nut\u003c\/p\u003e  \u003ch4\u003eMaking the Choice\u003c\/h4\u003e  \u003cp\u003eNut Drivers should fit the Nut smoothly with NO slop. Any slop will almost certainly cause Driver or Nut damage.\u003c\/p\u003e  \u003cp\u003eBlade-type tips must NOT be too small and “sloppy” in the screw head. This will chew out the centre of the screw and the under-sized driver tip may also be damaged.\u003c\/p\u003e  \u003cp\u003eCross-type tips must NOT be significantly smaller than the screw-head. This will damage the screw and may also allow too much leverage, damaging the too-small tip.\u003c\/p\u003e  \u003cp\u003eCross-type tips must NOT be significantly larger than the screw-head recess. This will badly damage a screw-head quite quickly, making it impossible to remove it.\u003c\/p\u003e  \u003c\/div\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":56355745333628,"sku":"DCT-SND.12","price":22.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/DCT-SND12-WEB-scaled_d40ce610-9cfc-430c-8449-5a029b08fca5.jpg?v=1786092545","url":"https:\/\/www.kernowmodelrailcentre.com\/products\/dct-snd-12-dcc-concepts-screw-and-nut-driver-set","provider":"Kernow Model Rail Centre","version":"1.0","type":"link"}