{"title":"Decoders","description":null,"products":[{"product_id":"10433-lenz-gold-loco-decoder","title":"10433 Lenz Gold Loco Decoder","description":"10433 Lenz Gold Loco Decoder.\u003cp\u003eMotor current - 1 amp continuous, 1.8 amp maximum\u003c\/p\u003e\u003cp\u003e4 Function outputs\u003c\/p\u003e\u003cp\u003eCable and NEM 652 plug connection\u003c\/p\u003e\u003cp\u003eSize 23x16.5x6.5mm\u003c\/p\u003e\u003cp\u003e  \u003c\/p\u003e\u003cp\u003eThe new  gold series decoders revolutionize decoder technology.  \u003c\/p\u003e\u003cp\u003eFEATURES   \u003c\/p\u003e\u003cp\u003e  Motor control \u003c\/p\u003e\u003cp\u003e  The decoder has a high-frequency control (23kHz) with Back EMF. To adapt it to the type of locomotive used, you can simply choose between different motor types. These individual motor types include parameter sets which have been specially adapted to the respective models. Moreover, it is also possible to carry out fine-tuning via various CVs.  Of course you can switch off both the high-frequency control as well as the control system itself.  The minimum, maximum and mid speed can be set; the decoder adapts the characteristic speed line dynamically to ensure a steady, smooth  curve. Independently of this, it is also possible to program an individual characteristic speed line.  You can use up to 128 running notches.  \u003c\/p\u003e\u003cp\u003eCapacity\u003c\/p\u003e\u003cp\u003e  We have defined the continuous or maximum current-carrying capacities of the GOLD decoder motor outputs. The continuous load is achieved without special installation of heat sinks or other cooling methods  \u003c\/p\u003e\u003cp\u003eOverload protection\u003c\/p\u003e\u003cp\u003e  The decoders are protected against overloading, short circuits and overheating.  \u003c\/p\u003e\u003cp\u003eStarting and braking delay\u003c\/p\u003e\u003cp\u003e  The starting and braking delays can be set independently of each other. These delays can be enabled and disabled via a function by pressing the key (default setting function 4) of the digital system once.  \u003c\/p\u003e\u003cp\u003eConstant braking distance\u003c\/p\u003e\u003cp\u003e  A special feature of the GOLD decoder provides for a constant braking distance independent of the current speed of the locomotive. This feature is important for model railway operators who install automatic stopping sections in their layouts.  \u003c\/p\u003e\u003cp\u003eShunting speed\u003c\/p\u003e\u003cp\u003e  The shunting speed can be set via a function; (default setting function 3)  it halves the speed.  \u003c\/p\u003e\u003cp\u003eABC = simple signal stop and slow approach \u003c\/p\u003e\u003cp\u003e  You can carry out a particularly simple signal stop using the ABC braking module e. g. the BM1 module. Combined with the constant braking distance, precise on-the-spot stopping in front of red signals is not a problem.   The signal indication \"\"Slow approach\/Caution\"\" does not pose a problem; the respective speed can be set via a CV in the decoder.  You can operate all functions during the signal stop or slow approach - you can even reverse away again from the red signal.  The special ABC modules BM3 can be used to assemble a block section of any desired length.  \u003c\/p\u003e\u003cp\u003ePush-pull train control\u003c\/p\u003e\u003cp\u003e  A push-pull train control can be set if the ABC braking module BM2 is used. There are two different options: push-pull operation with and without intermediate stops. The latter also takes slow-approach sections into account. The stopping time at the end of the track and at the intermediate stops is set at between 1 and 255 seconds via a CV.  \u003c\/p\u003e\u003cp\u003eUSP\u003c\/p\u003e\u003cp\u003e  In combination with the optional energy storage module, the intelligent USP circuit ensures that your locomotive can run even over dirty track sections or dead frogs. The energy storage is installed separately in the vehicle.  \u003c\/p\u003e\u003cp\u003eRailCom\u003c\/p\u003e\u003cp\u003e  The GOLD decoder is equipped with the RailCom function. In addition to the locomotive address, other data (e.g. speed, CV content) can be transmitted from the locomotive via the track back to the system and displayed.  \u003c\/p\u003e\u003cp\u003eFunction outputs\u003c\/p\u003e\u003cp\u003e  Four function outputs can be mapped to the functions of the digital system according to NMRA.  \u003c\/p\u003e\u003cp\u003eLighting effects\u003c\/p\u003e\u003cp\u003e  Different lighting effects can be set at the four function outputs:  \u003c\/p\u003e\u003cp\u003eSetting the brightness (dimming), can be switched via a function as desired  \u003c\/p\u003e\u003cp\u003eMars light  \u003c\/p\u003e\u003cp\u003eGyra light  \u003c\/p\u003e\u003cp\u003eStrobe and double strobe  \u003c\/p\u003e\u003cp\u003eDifferent settings for random flickering (ideal for a steam locomotive fire box)  \u003c\/p\u003e\u003cp\u003eFlashing  \u003c\/p\u003e\u003cp\u003eThe S.U.S.I. interface\u003c\/p\u003e\u003cp\u003e  The S.U.S.I. interface enables the connection of sound or function modules which support this interface.\u003c\/p\u003e","brand":"Lenz Digital","offers":[{"title":"Default Title","offer_id":56355415687548,"sku":"LZ10433","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/prod_18103_feb46aea-8140-4133-8d4b-c9f7bb9bf9e0.jpg?v=1786091653"},{"product_id":"10311-lenz-silver-mini-loco-decoder","title":"10311 Lenz Silver Mini Loco Decoder","description":"\u003cp\u003e10311 Lenz Silver Mini Loco Decoder.  Motor current 0.5amp continuous, 0.8 amp maximum, NEM 651 Plug Connection, 2 Function outputs\u003c\/p\u003e","brand":"Lenz Digital","offers":[{"title":"Default Title","offer_id":56355430728060,"sku":"LZ10311","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/10311.jpg?v=1786091653"},{"product_id":"36-559-bachmann-8-pin-dcc-decoder-adapter","title":"36-559 Bachmann 8 Pin DCC Decoder Adapter","description":"\u003cp\u003e36-559 Bachmann 8 Pin DCC Decoder Adapter. Use to convert 21 pin socket to 8 Pin socket.\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355431645564,"sku":"36-559","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/prod_22341_d44205ef-5602-4750-9702-d418d4dcff89.jpg?v=1786091841"},{"product_id":"10330-lenz-silver-direct-loco-decoder","title":"10330 Lenz Silver Direct Loco Decoder","description":"10330 Lenz Silver Direct Loco Decoder.    \u003cp\u003eA special decoder for locomotives equipped with a 8-pin NEM652-interface. The decoder pins are located directly on the circuit board and the decoder is simply plugged onto the interface. It doesn't get much easier! Thanks to the small dimensions, the decoder may be easily installed in a variety of locomotives  \u003c\/p\u003e\u003cp\u003eMotor current 1amp continuous, 1.8 amp maximum, NEM 652 Plug Connection, 4 Function outputs, Dimensions 18mm length x13mm wide x 3.5mm height.  Load capacity 4 x 100mA.  \u003c\/p\u003e\u003cp\u003eThe new silver series decoders revolutionize decoder technology.  \u003c\/p\u003e\u003cp\u003e  FEATURES   \u003c\/p\u003e\u003cp\u003e  Motor control \u003c\/p\u003e\u003cp\u003e  The decoder has a high-frequency control (23kHz) with Back EMF. To adapt it to the type of locomotive used, you can simply choose between different motor types. These individual motor types include parameter sets which have been specially adapted to the respective models. Moreover, it is also possible to carry out fine-tuning via various CVs.  Of course you can switch off both the high-frequency control as well as the control system itself.  The minimum, maximum and mid speed can be set; the decoder adapts the characteristic speed line dynamically to ensure a steady, smooth  curve. Independently of this, it is also possible to program an individual characteristic speed line.  You can use up to 128 running notches.  \u003c\/p\u003e\u003cp\u003eCapacity\u003c\/p\u003e\u003cp\u003e  We have defined the continuous or maximum current-carrying capacities of the GOLD decoder motor outputs. The continuous load is achieved without special installation of heat sinks or other cooling methods  \u003c\/p\u003e\u003cp\u003eOverload protection\u003c\/p\u003e\u003cp\u003e  The decoders are protected against overloading, short circuits and overheating.  \u003c\/p\u003e\u003cp\u003eStarting and braking delay\u003c\/p\u003e\u003cp\u003e  The starting and braking delays can be set independently of each other. These delays can be enabled and disabled via a function by pressing the key (default setting function 4) of the digital system once.  \u003c\/p\u003e\u003cp\u003eConstant braking distance  \u003c\/p\u003e\u003cp\u003eA special feature of the GOLD decoder provides for a constant braking distance independent of the current speed of the locomotive. This feature is important for model railway operators who install automatic stopping sections in their layouts.  \u003c\/p\u003e\u003cp\u003eShunting speed\u003c\/p\u003e\u003cp\u003e  The shunting speed can be set via a function; (default setting function 3)  it halves the speed.  \u003c\/p\u003e\u003cp\u003eABC = simple signal stop and slow approach \u003c\/p\u003e\u003cp\u003e  You can carry out a particularly simple signal stop using the ABC braking module e. g. the BM1 module. Combined with the constant braking distance, precise on-the-spot stopping in front of red signals is not a problem.   The signal indication \"\"Slow approach\/Caution\"\" does not pose a problem; the respective speed can be set via a CV in the decoder.  You can operate all functions during the signal stop or slow approach - you can even reverse away again from the red signal.  The special ABC modules BM3 can be used to assemble a block section of any desired length.  \u003c\/p\u003e\u003cp\u003ePush-pull train control\u003c\/p\u003e\u003cp\u003e  A push-pull train control can be set if the ABC braking module BM2 is used. There are two different options: push-pull operation with and without intermediate stops. The latter also takes slow-approach sections into account. The stopping time at the end of the track and at the intermediate stops is set at between 1 and 255 seconds via a CV.  \u003c\/p\u003e\u003cp\u003eFunction outputs\u003c\/p\u003e\u003cp\u003e  Four function outputs can be mapped to the functions of the digital system according to NMRA.  \u003c\/p\u003e\u003cp\u003eLighting effects\u003c\/p\u003e\u003cp\u003e  Different lighting effects can be set at the four function outputs:  \u003c\/p\u003e\u003cp\u003eSetting the brightness (dimming), can be switched via a function as desired  \u003c\/p\u003e\u003cp\u003eMars light  \u003c\/p\u003e\u003cp\u003eGyra light  \u003c\/p\u003e\u003cp\u003eStrobe and double strobe  \u003c\/p\u003e\u003cp\u003eDifferent settings for random flickering (ideal for a steam locomotive fire box)  \u003c\/p\u003e\u003cp\u003eFlashing  \u003c\/p\u003e\u003cp\u003eThe SILVER series will replace the following decoders :  \u003c\/p\u003e\u003cp\u003eLE1025 -   Item-no. 10133  \u003c\/p\u003e\u003cp\u003eLE1024A - Item-no. 10210  \u003c\/p\u003e\u003cp\u003eLE1024E - Item-no. 10211\u003c\/p\u003e","brand":"Lenz Digital","offers":[{"title":"Default Title","offer_id":56355432071548,"sku":"LZ10330","price":35.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/10330_7a4c57db-a7c6-4897-b7fc-41969b3327aa.jpg?v=1786091653"},{"product_id":"10310-lenz-silver-mini-loco-decoder","title":"10310 Lenz Silver Mini Loco Decoder","description":"\u003cp\u003e10310 Lenz Silver Mini Loco Decoder.  Motor current 0.5amp continuous, 0.8 amp maximum, Wire Connection, 2 Function outputs\u003c\/p\u003e","brand":"Lenz Digital","offers":[{"title":"Default Title","offer_id":56355432104316,"sku":"LZ10310","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/prod_22667.jpg?v=1786091653"},{"product_id":"10231-lenz-standard-8-pin-loco-decoder","title":"10231 Lenz Standard 8 Pin Loco Decoder","description":"10231 Lenz Standard Loco Decoder. Motor current 1amp continuous, 1.8 amp maximum, NEM 652 Plug Connection, 3 Function outputs, Dimensions 23mm length x 16.6mm wide x 3.5mm height. Load capacity 3 x 100mA.  \u003cp\u003eFEATURES\u003c\/p\u003e  \u003cp\u003eMotor control\u003c\/p\u003e  \u003cp\u003eThe decoder has a high-frequency control (23kHz) with Back EMF. To adapt it to the type of locomotive used, you can simply choose between different motor types. These individual motor types include parameter sets which have been specially adapted to the respective models. Moreover, it is also possible to carry out fine-tuning via various CVs. Of course you can switch off both the high-frequency control as well as the control system itself. The minimum, maximum and mid speed can be set; the decoder adapts the characteristic speed line dynamically to ensure a steady, smooth curve. Independently of this, it is also possible to program an individual characteristic speed line. You can use up to 128 running notches.\u003c\/p\u003e  \u003cp\u003eCapacity\u003c\/p\u003e  \u003cp\u003eLenz have defined the continuous or maximum current-carrying capacities of the decoder motor outputs. The continuous load is achieved without special installation of heat sinks or other cooling methods\u003c\/p\u003e  \u003cp\u003eOverload protection\u003c\/p\u003e  \u003cp\u003eThe decoders are protected against overloading, short circuits and overheating.\u003c\/p\u003e  \u003cp\u003eStarting and braking delay\u003c\/p\u003e  \u003cp\u003eThe starting and braking delays can be set independently of each other. These delays can be enabled and disabled via a function by pressing the key (default setting function 4) of the digital system once.\u003c\/p\u003e  \u003cp\u003eShunting speed\u003c\/p\u003e  \u003cp\u003eThe shunting speed can be set via a function; (default setting function 3) it halves the speed.\u003c\/p\u003e  \u003cp\u003eFunction outputs\u003c\/p\u003e  \u003cp\u003eThree function outputs can be mapped to the functions of the digital system according to NMRA.\u003c\/p\u003e  \u003cp\u003eLighting effects\u003c\/p\u003e  \u003cp\u003eDifferent lighting effects can be set at the four function outputs:\u003c\/p\u003e  \u003cp\u003eSetting the brightness (dimming), can be switched via a function as desired\u003c\/p\u003e  \u003cp\u003eMars light\u003c\/p\u003e  \u003cp\u003eGyra light\u003c\/p\u003e  \u003cp\u003eStrobe and double strobe\u003c\/p\u003e  \u003cp\u003eDifferent settings for random flickering (ideal for a steam locomotive fire box)\u003c\/p\u003e  \u003cp\u003eFlashing\u003c\/p\u003e","brand":"Lenz Digital","offers":[{"title":"Default Title","offer_id":56355433513340,"sku":"LZ10231","price":23.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/10231_f7ac8774-0acb-41c8-b697-cc8a4221d416.jpg?v=1786091653"},{"product_id":"10321-lenz-21-pin-silver-loco-decoder","title":"10321 Lenz 21 Pin Silver Loco Decoder","description":"10321 Lenz 21-pin Silver Loco Decoder. Motor current 1amp continuous, 1.8 amp maximum, 21-pin Plug Connection, 4 Function outputs, Dimensions 23mm length x 16.6mm wide x 3.5mm height. Load capacity 4 x 100mA.  \u003cp\u003eThe new silver series decoders revolutionize decoder technology.\u003c\/p\u003e  \u003cp\u003eFEATURES\u003c\/p\u003e  \u003cp\u003eMotor control\u003c\/p\u003e  \u003cp\u003eThe decoder has a high-frequency control (23kHz) with Back EMF. To adapt it to the type of locomotive used, you can simply choose between different motor types. These individual motor types include parameter sets which have been specially adapted to the respective models. Moreover, it is also possible to carry out fine-tuning via various CVs. Of course you can switch off both the high-frequency control as well as the control system itself. The minimum, maximum and mid speed can be set; the decoder adapts the characteristic speed line dynamically to ensure a steady, smooth curve. Independently of this, it is also possible to program an individual characteristic speed line. You can use up to 128 running notches.\u003c\/p\u003e  \u003cp\u003eCapacity\u003c\/p\u003e  \u003cp\u003eWe have defined the continuous or maximum current-carrying capacities of the GOLD decoder motor outputs. The continuous load is achieved without special installation of heat sinks or other cooling methods\u003c\/p\u003e  \u003cp\u003eOverload protection\u003c\/p\u003e  \u003cp\u003eThe decoders are protected against overloading, short circuits and overheating.\u003c\/p\u003e  \u003cp\u003eStarting and braking delay\u003c\/p\u003e  \u003cp\u003eThe starting and braking delays can be set independently of each other. These delays can be enabled and disabled via a function by pressing the key (default setting function 4) of the digital system once.\u003c\/p\u003e  \u003cp\u003eConstant braking distance\u003c\/p\u003e  \u003cp\u003eA special feature of the GOLD decoder provides for a constant braking distance independent of the current speed of the locomotive. This feature is important for model railway operators who install automatic stopping sections in their layouts.\u003c\/p\u003e  \u003cp\u003eShunting speed\u003c\/p\u003e  \u003cp\u003eThe shunting speed can be set via a function; (default setting function 3) it halves the speed.\u003c\/p\u003e  \u003cp\u003eABC = simple signal stop and slow approach\u003c\/p\u003e  \u003cp\u003eYou can carry out a particularly simple signal stop using the ABC braking module e. g. the BM1 module. Combined with the constant braking distance, precise on-the-spot stopping in front of red signals is not a problem. The signal indication \"\"Slow approach\/Caution\"\" does not pose a problem; the respective speed can be set via a CV in the decoder. You can operate all functions during the signal stop or slow approach - you can even reverse away again from the red signal. The special ABC modules BM3 can be used to assemble a block section of any desired length.\u003c\/p\u003e  \u003cp\u003ePush-pull train control\u003c\/p\u003e  \u003cp\u003eA push-pull train control can be set if the ABC braking module BM2 is used. There are two different options: push-pull operation with and without intermediate stops. The latter also takes slow-approach sections into account. The stopping time at the end of the track and at the intermediate stops is set at between 1 and 255 seconds via a CV.\u003c\/p\u003e  \u003cp\u003eFunction outputs\u003c\/p\u003e  \u003cp\u003eFour function outputs can be mapped to the functions of the digital system according to NMRA.\u003c\/p\u003e  \u003cp\u003eLighting effects\u003c\/p\u003e  \u003cp\u003eDifferent lighting effects can be set at the four function outputs:\u003c\/p\u003e  \u003cp\u003eSetting the brightness (dimming), can be switched via a function as desired\u003c\/p\u003e  \u003cp\u003eMars light\u003c\/p\u003e  \u003cp\u003eGyra light\u003c\/p\u003e  \u003cp\u003eStrobe and double strobe\u003c\/p\u003e  \u003cp\u003eDifferent settings for random flickering (ideal for a steam locomotive fire box)\u003c\/p\u003e  \u003cp\u003eFlashing\u003c\/p\u003e","brand":"Lenz Digital","offers":[{"title":"Default Title","offer_id":56355433546108,"sku":"LZ10321","price":34.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/10321_82726465-e788-4e5c-8117-70d6548da5c3.jpg?v=1786091653"},{"product_id":"r8247-hornby-dcc-accessory-decoder","title":"R8247 Hornby DCC Accessory Decoder","description":"R8247 Hornby DCC Accessory Decoder. \u003cbr\u003e\u003cbr\u003eSimilar to the R8216, but the four outputs are factory set for the operation of solenoid (point) motors, however, by adjusting the CV settings of each output a graduation of varying \"\"bursts\"\" of current up to a constant current (turntable motor operation, lighting, etc.) can be obtained for each individual output.","brand":"Hornby","offers":[{"title":"Default Title","offer_id":56355438199164,"sku":"R8247","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/prod_23779_ff2fe149-adb1-48ba-9e2d-a2ef71abe880.jpg?v=1786092890"},{"product_id":"36-562-wsl-bachmann-6-pin-decoder-socket-with-wiring-harness","title":"36-562 Bachmann 6 Pin Decoder Socket with wiring harness","description":"\u003cp\u003e36-562 Bachmann 6 Pin Decoder Socket with wiring harness.  (Pack of 3)\u003c\/p\u003e  \u003cp\u003eAllowing for loco’s without a socket to have a socket fixed to it. The advantages of this is that it is easier to fix a socket and then plug and play a decoder rather than trying to solder a decoder to the loco.\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355460022652,"sku":"36-562","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/image1.28309_e1804b71-0644-44d6-86a4-7c4c0fdaa8c9.jpg?v=1786091841"},{"product_id":"36-563-bachmann-6-pin-decoder-socket-with-8-pin-plug","title":"36-563 Bachmann 6 Pin Decoder Socket with 8 pin plug","description":"\u003cp\u003e36-563 Bachmann 6 Pin Decoder Socket with 8 pin plug.  (Pack of 3)\u003c\/p\u003e  \u003cp\u003eWhere space is tight on a OO loco such as a CL-08 fix a 6 pin decoder using this harness which converts the 6 pin decoder to 8 pin plug\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355460088188,"sku":"36-563","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/aa.28310.jpg?v=1786091841"},{"product_id":"36-564-bachmann-8-pin-decoder-socket-with-wire-harness","title":"36-564 Bachmann 8 Pin Decoder Socket with wire harness","description":"\u003cp\u003e36-564 Bachmann 8 Pin Decoder Socket with wire harness. \u003c\/p\u003e  \u003cp\u003eAllowing for loco’s without a socket to have a socket fixed to it. The advantages of this is that it is easier to fix a socket and then plug and play a decoder rather than trying to solder a decoder to the loco.\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355460120956,"sku":"36-564","price":8.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/prod_28311_ef735f09-8cc4-48bf-9c43-70f0adccf35a.jpg?v=1786091842"},{"product_id":"dcc90-wsl-gaugemaster-ruby-series-decoder-with-2-functions","title":"DCC90 Gaugemaster Ruby Series Decoder with 2 functions","description":"\u003cp\u003eDCC90 Gaugemaster Ruby Series Decoder with 2 functions and NMRA 8pin plug. \u003cbr\u003e\u003cbr\u003eThe DCC90 is a large 8 pin decoder which is fitted with a removable 25mm harness including 2 function wires. Fitted in the decoder is a small 2 pin socket which can have the PowerPal inserted into it (sold seperately), This helps keep the locomotive moving in dirty or dead track sections.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e  \u003ch3\u003eFEATURES\u003c\/h3\u003e  \u003cul class=\"\" gm-list\u003e  \u003cli\u003e2 Digit and 4 Digit Addressing\u003c\/li\u003e  \u003cli\u003e14, 28 or 128 Speed Steps\u003c\/li\u003e  \u003cli\u003eSmooth Operation\u003c\/li\u003e  \u003cli\u003eConstant Brightness Lighting\u003c\/li\u003e  \u003cli\u003eDirect Mode Programming\u003c\/li\u003e  \u003cli\u003eMotor Isolation Protection\u003c\/li\u003e  \u003cli\u003eAdvanced Consisting\u003c\/li\u003e  \u003cli\u003eSocket to Add PowerPal\u003c\/li\u003e  \u003c\/ul\u003e","brand":"Gaugemaster","offers":[{"title":"Default Title","offer_id":56355506520444,"sku":"DCC90","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/image1.38686_9a4ed22c-2914-494c-8b6e-075049d97fb6.jpg?v=1786092537"},{"product_id":"r7274-hornby-dcc-decoder-for-use-with-sentinel-or-peckett","title":"R7274 Hornby DCC Decoder for use with Sentinel or Peckett","description":"\u003cp\u003eR7274 Hornby DCC Decoder for use with Sentinel Diesel Locomotives and Peckett Steam Locomotives.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":56355513926012,"sku":"R7274","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/R7274_20Hornby_20DCC_20Decoder_20for_20use_20with_20Sentinel_20or_20Peckett_8d95ac56-e282-45fa-a588-9c4017906ad5.jpg?v=1786092881"},{"product_id":"36-556ra-bachmann-e-z-command-6-pin-dcc-decoder-with-back-emf","title":"36-556RA Bachmann E-Z Command 6 Pin DCC Decoder with Back EMF","description":"\u003cp\u003e36-556RA Bachmann E-Z Command 6 Pin DCC Decoder with Back EMF suitable for N and OO Gauge locos.  Decoder is at right angles to socket.\u003c\/p\u003e  \u003cp\u003e\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355515236732,"sku":"36-556RA","price":19.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/prod_40708_2926_45a9acbf-70b9-4802-a34f-e9cc374f5e7f.jpg?v=1786091842"},{"product_id":"10318-lenz-silver-next18-digital-decoder-with-nem663-plug","title":"10318 Lenz Silver + Next18 Digital Decoder with NEM663 plug","description":"\u003cp\u003e10318 Lenz Silver + Next 18 Digital Decoder with NEM663 plug. \u003c\/p\u003e  \u003cp\u003eThe Lenz Digital Plus Silver  locomotive decoder is suitable for all DC Locos with Next18 interface.  At the moment Next 18 is found in Bachmann Liliput and Tillig products.\u003c\/p\u003e  \u003cp\u003eThe characteristics of the decoder are:\u003cbr\u003e •Super smooth and silent high frequency back emf motor control\u003cbr\u003e •Supports Automatic Braking Control (ABC)\u003cbr\u003e •Shunting speed on F3\u003cbr\u003e •Suitable for operation with 14\/27 or 28\/128 speed steps\u003cbr\u003e •Operation on conventional DC layouts is posible or may be disabled\u003cbr\u003e •Motor and function outputs have short circuit protection\u003cbr\u003e •Seven function outputs rated at 500mA each with advanced function mapping\u003cbr\u003e •Directional or independent lighting with dimming and special effects\u003cbr\u003e •Support for Multiple traction and long addresses (Loco addresses up to 9,999)\u003cbr\u003e •Support for programming on the mainline (Programming on Main POM)\u003cbr\u003e •Support for all forms of programming as described in NMRA RP-9.2.3\u003cbr\u003e •RailCom\u003c\/p\u003e","brand":"Lenz Digital","offers":[{"title":"Default Title","offer_id":56355605381500,"sku":"LZ10318","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/Image11470669988_jpg_d2bfa491-96d6-4013-bdd1-b97699f4ce72.jpg?v=1786091652"},{"product_id":"dcd-zn218-6-dcc-concepts-zen-black-21-pin-dcc-decoder-6-fn","title":"DCD-ZN218.6 DCC Concepts Zen Black 21 Pin DCC Decoder 6 fn","description":"\u003cp\u003eDCD-ZN218.6 DCC Concepts Zen Black 21 Pin DCC Decoder with six functions and stay-alive capability.\u003c\/p\u003e  \u003cp\u003eZen decoder software has always been smooth, clever and easy to use but the new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection.\u003cbr\u003e\u003cbr\u003eAll of these decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.\u003cbr\u003e\u003cbr\u003eDCD-ZN218.6 replaces the previous version – DCD-Z218.\u003c\/p\u003e  \u003cp\u003eDecoder features:\u003cbr\u003e– 1.1 Amps peak power\u003cbr\u003e– 750mA continuous power\u003cbr\u003e– 6 functions at 100mA each\u003cbr\u003e– 22mm x 16.5mm\u003cbr\u003e– 21-pin direct, 8-pin \u0026amp; harness\u003cbr\u003e– One-Step Loco Setup\u003cbr\u003e– Shuttle mode (requires ABC boards for this to function)\u003cbr\u003e– Stay-Alive connection\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":56355611115900,"sku":"DCD-ZN218.6","price":26.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/DCD-ZN218-6_153852de-3555-4829-bf84-4dd6c3a2467a.png?v=1786092542"},{"product_id":"dcd-zn6d-2-dcc-concepts-zen-micro-6-pin-dcc-decoder-2-functions","title":"DCD-ZN6D.2 DCC Concepts Zen Micro 6 Pin DCC Decoder 2 functions","description":"\u003cp\u003eDCD-ZN6D.2 DCC Concepts Zen Micro 6 Pin DCC Decoder with two functions and stay-alive capability.\u003c\/p\u003e  \u003cp\u003eThis 6 pin direct plug decoder fits nicely into any locomotive fitted with an NEM651 socket. The decoder offers slow running characteristics and as it is the smallest decoder in the range you will always find places to house it.\u003c\/p\u003e  Decoder features:\u003cbr\u003e  \u003cul\u003e  \u003cli\u003e1.1 Amps peak power\u003c\/li\u003e  \u003cli\u003e750mA continuous power\u003c\/li\u003e  \u003cli\u003e2 functions at 100mA each\u003c\/li\u003e  \u003cli\u003e14mm x 9mm\u003c\/li\u003e  \u003cli\u003e6-pin direct\u003c\/li\u003e  \u003cli\u003eOne-Step Loco Setup\u003c\/li\u003e  \u003cli\u003eStay-Alive connection\u003c\/li\u003e  \u003c\/ul\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":56355611148668,"sku":"DCD-ZN6D.2","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/DCD-ZN6D.2_201_ebd79091-9eaf-444c-9972-627bf2663161.jpg?v=1786092540"},{"product_id":"dcd-zn68-2-dcc-concepts-zen-micro-6-pin-versatile-dcc-decoder","title":"DCD-ZN68.2 DCC Concepts Zen Micro 6 Pin Versatile DCC Decoder","description":"\u003cp\u003eDCD-ZN68.2 DCC Concepts Zen Micro 6 Pin Versatile DCC Decoder with two functions and stay-alive capability.\u003c\/p\u003e  \u003cp\u003eZen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with simple-to-use ONE step locomotive set-up and advanced brown-out protection.\u003cbr\u003eAll of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDecoder features:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e1.1 Amps peak power\u003c\/li\u003e  \u003cli\u003e750mA continuous power\u003c\/li\u003e  \u003cli\u003e2 functions at 100mA each\u003c\/li\u003e  \u003cli\u003e6-pin direct, 6-pin harness and 8-pin harness\u003c\/li\u003e  \u003cli\u003eOne-Step Loco Setup\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch5\u003eDimensions:\u003c\/h5\u003e  \u003cul\u003e  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 13.5mm\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 8.5mm\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 3mm\u003c\/li\u003e  \u003c\/ul\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":56355611181436,"sku":"DCD-ZN68.2","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/image11447939384.jpg?v=1786092540"},{"product_id":"36-568a-bachmann-6-pin-dcc-loco-decoder-with-back-emf","title":"36-568A Bachmann 6 Pin DCC Loco-Decoder with Back EMF","description":"\u003cp\u003e36-568A Bachmann 6 Pin DCC Loco-Decoder with Back EMF with Railcom.\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e0.8 Amp continuous Current    \u003c\/li\u003e  \u003cli\u003e  \u003cdiv style=\"\" margin-top:\u003e1.5 Amp Peak Motor Current    \u003c\/div\u003e  \u003c\/li\u003e  \u003cli\u003e  \u003cdiv style=\"\" margin-top:\u003e4 Function Outputs - Amplified (0.5 Amps Each \/ Total) plus 2 Logic,       susi or Servo outputs    \u003c\/div\u003e  \u003c\/li\u003e  \u003cli\u003e  \u003cdiv style=\"\" margin-top:\u003eNew Brake Functions on F2 to allow deceleration control    \u003c\/div\u003e  \u003c\/li\u003e  \u003cli\u003e  \u003cdiv style=\"\" margin-top:\u003eLong Addressing    \u003c\/div\u003e  \u003c\/li\u003e  \u003cli\u003e  \u003cdiv style=\"\" margin-top:\u003eMultiple Programming Options    \u003c\/div\u003e  \u003c\/li\u003e  \u003cli\u003e  \u003cdiv style=\"\" margin-top:\u003eConsist Option (Double Heading)    \u003c\/div\u003e  \u003c\/li\u003e  \u003cli\u003e  \u003cdiv style=\"\" margin-top:\u003eRailcom Compatible    \u003c\/div\u003e  \u003c\/li\u003e  \u003cli\u003e  \u003cdiv style=\"\" margin-top:\u003eMade By Zimo    \u003c\/div\u003e  \u003c\/li\u003e  \u003cli\u003e  \u003cdiv style=\"\" margin-top:\u003eDC Operation    \u003c\/div\u003e  \u003c\/li\u003e  \u003cli\u003e  \u003cdiv style=\"\" margin-top:\u003eUser Defined Speed Curve    \u003c\/div\u003e  \u003c\/li\u003e  \u003cli\u003e  \u003cdiv style=\"\" margin-top:\u003eSize – 14mm \/ 9mm \/ 2.5mm\u003c\/div\u003e  \u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355618587004,"sku":"36-568A","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/Image11484585662_jpg.jpg?v=1786091842"},{"product_id":"imperium1-dapol-imperium-21-pin-dcc-decoder","title":"Imperium1 Dapol Imperium 21 Pin DCC Decoder","description":"Imperium1 Dapol Imperium 21 Pin MTC DCC Decoder with 6 functions\u003cbr\u003e\u003cbr\u003e","brand":"Dapol","offers":[{"title":"Default Title","offer_id":56355627008380,"sku":"IMPERIUM1","price":24.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/Imperium1_28d9db9f-70a3-4e61-83ef-142b3cc58e5a.jpg?v=1786092648"},{"product_id":"imperium2-dapol-imperium-next18-pin-mtc-dcc-decoder","title":"Imperium2 Dapol Imperium Next18 Pin MTC DCC Decoder","description":"Imperium2 Dapol Imperium Next 18 Pin MTC DCC Decoder with 6 functions\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Dapol","offers":[{"title":"Default Title","offer_id":56355629990268,"sku":"IMPERIUM2","price":24.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/Imperium_202._b9405c87-4185-4fad-9114-313bfb1f752e.jpg?v=1786092648"},{"product_id":"r7150-hornby-standard-6-pin-decoder","title":"R7150 Hornby Standard 6 Pin Decoder","description":"\u003cp\u003eR7150 Hornby 6 pin Decoder (on wired harness) with 2 functions.\u003cbr\u003e\u003cbr\u003e(produced for use with the Hornby B2 Peckett, new Terrier Locos and other suitable 6 pin socket locos)\u003c\/p\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":56355699097980,"sku":"R7150","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/R7150_STANDARD-6-PIN-DECODER_3ccdd466-ca8b-4223-b165-0f5503c13a02.jpg?v=1786092880"},{"product_id":"imperium3-dapol-imperium-21-pin-dcc-decoder-with-8-functions","title":"Imperium3 Dapol Imperium 21 Pin DCC Decoder with 8 functions","description":"Imperium3 Dapol Imperium 21 Pin DCC Decoder with 8 functions\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Dapol","offers":[{"title":"Default Title","offer_id":56355743236476,"sku":"IMPERIUM3","price":25.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/Imperium_203..jpg?v=1786092649"},{"product_id":"dcc93-gaugemaster-ruby-series-2fn-small-dcc-6-pin-decoder","title":"DCC93 Gaugemaster Ruby Series 2fn Small DCC 6 Pin Decoder","description":"\u003cp\u003eDCC93 Gaugemaster Ruby Series 2fn Small DCC 6 Pin Decoder. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e  \u003ch3 class=\"\" h2\u003eDetails\u003c\/h3\u003e  \u003cp\u003eThe DCC93 is a 6 pin direct plug decoder which is most suited to N Scale locomotives. It can also be used in some HO\/OO locomotives.\u003c\/p\u003e  \u003ch3\u003eFeatures\u003c\/h3\u003e  \u003cul class=\"\" gm-list style=\"\" none list-style:=\"\"\u003e  \u003cli\u003e2 Digit and 4 Digit Addressing\u003c\/li\u003e  \u003cli\u003e14, 28 or 128 Speed Steps\u003c\/li\u003e  \u003cli\u003eSmooth Operation\u003c\/li\u003e  \u003cli\u003eConstant Brightness Lighting\u003c\/li\u003e  \u003cli\u003eDirect Mode Programming\u003c\/li\u003e  \u003cli\u003eMotor Isolation Protection\u003c\/li\u003e  \u003cli\u003eAdvanced Consisting\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eSpecifications\u003c\/h3\u003e  \u003ctable id=\"\" product-attribute-specs-table class=\"\" data-table gm-retail-table\u003e  \u003ctbody\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eNo. of Pins\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e6\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eNo. of Functions\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e2\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eSpeed Steps\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e14, 28 or 128\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eCurrent Rating\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e0.5A\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eMotor Current Rating\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e1.0A - 1.5A Max\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003ch3\u003eMeasurements\u003c\/h3\u003e  \u003ctable id=\"\" product-attribute-specs-table class=\"\" data-table gm-retail-table\u003e  \u003ctbody\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eLength\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e10mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eWidth\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e11mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eThickness\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e3mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e","brand":"Gaugemaster","offers":[{"title":"Default Title","offer_id":56355743367548,"sku":"DCC93","price":29.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/DCC93b_d457a8da-155c-4fde-a3ae-cca2bf16e9cc.jpg?v=1786092538"},{"product_id":"10322-lenz-plux-22-pin-silver-loco-decoder","title":"10322 Lenz PluX 22-pin Silver Loco Decoder","description":"10322 Lenz PluX 22-pin Silver Loco Decoder (NEM 658).\u003cbr\u003e\u003cbr\u003e  \u003cp\u003eThe DIGITAL plus SILVER PluX22 locomotive decoder has a built in NMRA 22 pin plug and is suitable for all DC locomotives with continuous current draw of 1.0 Amp. or less. For OO\/HO models with PluX22 decoder plug\u003c\/p\u003e  \u003cp\u003eThe characteristics of the decoder are:\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eSuper smooth and silent high frequency back-emf motor control.\u003c\/li\u003e  \u003cli\u003eSupports Automatic Braking Control (ABC)\u003c\/li\u003e  \u003cli\u003eAdjustable precision stopping control.\u003c\/li\u003e  \u003cli\u003eShunting speed on F3\u003c\/li\u003e  \u003cli\u003eSelectable for operation with 14\/27, or 28\/128 speed steps.\u003c\/li\u003e  \u003cli\u003eOperation on conventional DC layouts is possible or can be disabled.\u003c\/li\u003e  \u003cli\u003eMotor output = 1A continuous, 1.8A max, \u0026gt; 5 A stall.\u003c\/li\u003e  \u003cli\u003eMotor and function outputs protected.\u003c\/li\u003e  \u003cli\u003e9 function outputs rated at 100mA each with advanced function mapping. (Maximum for all functions 500mA\u003c\/li\u003e  \u003cli\u003eDirectional or independent lighting with dimming and special effects.\u003c\/li\u003e  \u003cli\u003eSupport for Multiple traction and long addresses (Loco addresses up to 9,999)\u003c\/li\u003e  \u003cli\u003eSupport for programming on the mainline (Programming on Main POM).\u003c\/li\u003e  \u003cli\u003eSupport for all forms of programming as described in NMRA RP-9.2.3\u003c\/li\u003e  \u003cli\u003eS.U.S.I. Interface through pins 1-4 in the PluX interface for specialist modules\u003c\/li\u003e  \u003cli\u003eRailCom\u003c\/li\u003e  \u003cli\u003eSize: L 22 mm x W 15mm x H 6mm\u003c\/li\u003e  \u003c\/ul\u003e","brand":"Lenz Digital","offers":[{"title":"Default Title","offer_id":56355743400316,"sku":"LZ10322","price":32.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/10322_36e816c6-9c6c-4c1b-b98b-c0a87cebaef7.jpg?v=1786091653"},{"product_id":"dcc89-gaugemaster-kato-class-800-decoder-set","title":"DCC89 Gaugemaster Kato Class 800 Decoder Set","description":"\u003cp\u003eDCC89 Gaugemaster Kato Class 800 Decoder Set. \u003c\/p\u003e  \u003cp\u003eThis set contains the three elements you will need for the ultimate in Digital Control for your Class 800. Containing 1 x EM13 Motor Control decoder and 2 x FL12 Head\/Tail Light Control Decoders, you'll soon be enjoying the rich Class 800 digital experience\u003c\/p\u003e","brand":"Gaugemaster","offers":[{"title":"Default Title","offer_id":56355768336764,"sku":"DCC89","price":45.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/DCC89.jpg?v=1786092537"},{"product_id":"36-567a-bachmann-next18-pin-dcc-decoder","title":"36-567A Bachmann Next18 Pin DCC Decoder","description":"\u003cp\u003e36-567A Bachmann Next 18 Pin DCC Decoder. \u003c\/p\u003e  \u003cp\u003eA Next18 (NEM662) DCC Decoder with brake Button function for realistic control.\u003c\/p\u003e  \u003cp\u003eSuitable for models fitted with a Next18 DCC decoder socket.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin) with Back EMF function\u003c\/p\u003e  \u003cp\u003e4 powered function outputs (+2 logic level and 2 logic level\/SUSI outputs)\u003c\/p\u003e  \u003cp\u003e0.7A continuous load\u003c\/p\u003e  \u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e  \u003cp\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"\" text-decoration: underline\u003eOperating Modes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin) with Back EMF function\u003c\/p\u003e  \u003cp\u003e14, 28 and 128 speed steps\u003c\/p\u003e  \u003cp\u003eShort and Long addresses\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"\" text-decoration: underline\u003eMotor Control Features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e  \u003cp\u003e0.7A continuous load\u003c\/p\u003e  \u003cp\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003c\/p\u003e  \u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"\" text-decoration: underline\u003eFunction Outputs\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e4 powered-function outputs with overload protection.\u003c\/p\u003e  \u003cp\u003e500mA load per output\u003c\/p\u003e  \u003cp\u003e500mA total load of all function outputs\u003c\/p\u003e  \u003cp\u003e2 additional logic level outputs and 2 logic level\/SUSI outputs\u003c\/p\u003e  \u003cp\u003eShunting speed and momentum key selectable\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"\" text-decoration: underline\u003eDimensions\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e15mm x 9.5mm x 2.8mm\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"\" text-decoration: underline\u003eDefault Address\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eAddress 3\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"\" text-decoration: underline\u003eProgramming\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"\" text-decoration: underline\u003eAdditional Features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eRailCom® Feedback system\u003c\/p\u003e  \u003cp\u003eUpgradable firmware\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355769352572,"sku":"36-567A","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/36-567A.jpg?v=1786091842"},{"product_id":"dcc91-gaugemaster-ruby-series-21-pin-decoder-with-2-functions","title":"DCC91 Gaugemaster Ruby Series 21 Pin Decoder with 2 functions","description":"\u003cp\u003eDCC91 Gaugemaster Ruby Series 21 Pin Decoder with 2 functions. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e  \u003cp\u003eThe DCC91 is a direct plug 21 pin decoder. Fitted in the decoder is a small 2 pin socket which can have the PowerPal inserted into it (sold seperately), This helps keep the locomotive moving in dirty or dead track sections.\u003c\/p\u003e  \u003ch3\u003eFEATURES\u003c\/h3\u003e  \u003cul class=\"\" gm-list\u003e  \u003cli\u003e2 Digit and 4 Digit Addressing\u003c\/li\u003e  \u003cli\u003e14, 28 or 128 Speed Steps\u003c\/li\u003e  \u003cli\u003eSmooth Operation\u003c\/li\u003e  \u003cli\u003eConstant Brightness Lighting\u003c\/li\u003e  \u003cli\u003eDirect Mode Programming\u003c\/li\u003e  \u003cli\u003eMotor Isolation Protection\u003c\/li\u003e  \u003cli\u003eAdvanced Consisting\u003c\/li\u003e  \u003cli\u003eSocket to Add PowerPal\u003c\/li\u003e  \u003c\/ul\u003e  \u003cbr\u003e  \u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e  \u003ctable id=\"\" product-attribute-specs-table\u003e  \u003ctbody\u003e  \u003ctr\u003e\n\u003cth\u003eNO. OF PINS\u003c\/th\u003e  \u003ctd\u003e21\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth\u003eNO. OF FUNCTIONS\u003c\/th\u003e  \u003ctd\u003e2\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth\u003eSPEED STEPS\u003c\/th\u003e  \u003ctd\u003e14, 28 or 128\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth\u003eCURRENT RATING\u003c\/th\u003e  \u003ctd\u003e0.5A\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth\u003eMOTOR CURRENT RATING\u003c\/th\u003e  \u003ctd\u003e1.5A - 2.0A Max\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cbr\u003e  \u003ch3\u003eMEASUREMENTS\u003c\/h3\u003e  \u003ctable id=\"\" product-attribute-specs-table\u003e  \u003ctbody\u003e  \u003ctr\u003e\n\u003cth\u003eLENGTH\u003c\/th\u003e  \u003ctd\u003e21mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth\u003eWIDTH\u003c\/th\u003e  \u003ctd\u003e16mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth\u003eTHICKNESS\u003c\/th\u003e  \u003ctd\u003e4mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e","brand":"Gaugemaster","offers":[{"title":"Default Title","offer_id":56355783836028,"sku":"DCC91","price":29.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/DCC91_20Gaugemaster_20Ruby_20Series_2021_20Pin_20Decoder_20with_202_20functions.jpg?v=1786092538"},{"product_id":"dcc92-gaugemaster-ruby-series-small-8-pin-decoder-2-functions","title":"DCC92 Gaugemaster Ruby Series Small 8 Pin Decoder 2 functions","description":"\u003cp\u003eDCC92 Gaugemaster Ruby Series Small 8 Pin Decoder with 2 functions. \u003c\/p\u003e  \u003cp\u003eThe DCC92 is a 8 pin decoder with a fitted 45mm harness between the pins and the decoder. An ideal decoder for retrofitting into non DCC Ready locomotives.\u003c\/p\u003e  \u003ch3\u003eFEATURES\u003c\/h3\u003e  \u003cul class=\"\" gm-list\u003e  \u003cli\u003e2 Digit and 4 Digit Addressing\u003c\/li\u003e  \u003cli\u003e14, 28 or 128 Speed Steps\u003c\/li\u003e  \u003cli\u003eSmooth Operation\u003c\/li\u003e  \u003cli\u003eConstant Brightness Lighting\u003c\/li\u003e  \u003cli\u003eDirect Mode Programming\u003c\/li\u003e  \u003cli\u003eMotor Isolation Protection\u003c\/li\u003e  \u003cli\u003eAdvanced Consisting\u003c\/li\u003e  \u003c\/ul\u003e  \u003cbr\u003e  \u003ch3\u003ePECIFICATIONS\u003c\/h3\u003e  \u003ctable id=\"\" product-attribute-specs-table class=\"\" data-table gm-retail-table\u003e  \u003ctbody\u003e  \u003ctr class=\"\" first odd\u003e\n\u003cth class=\"\" label\u003eNO. OF PINS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e8\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" even\u003e\n\u003cth class=\"\" label\u003eNO. OF FUNCTIONS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e2\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" odd\u003e\n\u003cth class=\"\" label\u003eSPEED STEPS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e14, 28 or 128\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" even\u003e\n\u003cth class=\"\" label\u003eCURRENT RATING\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e0.5A\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" last odd\u003e\n\u003cth class=\"\" label\u003eMOTOR CURRENT RATING\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e1.0A - 1.5A Max\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cbr\u003e  \u003ch3\u003eMEASUREMENTS\u003c\/h3\u003e  \u003ctable id=\"\" product-attribute-specs-table class=\"\" data-table gm-retail-table\u003e  \u003ctbody\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eLENGTH\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e12mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eWIDTH\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e10mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eTHICKNESS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e3mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eHARNESS LENGTH\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e45mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e","brand":"Gaugemaster","offers":[{"title":"Default Title","offer_id":56355783868796,"sku":"DCC92","price":29.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/DCC92.jpg?v=1786092538"},{"product_id":"dcc94-wsl-gaugemaster-ruby-series-6fn-pro-dcc-8-pin-decoder","title":"DCC94 Gaugemaster Ruby Series 6fn Pro DCC 8 Pin Decoder","description":"\u003cp\u003eDCC94 Gaugemaster Ruby Series 6fn Pro DCC 8 Pin Decoder. \u003c\/p\u003e  \u003cp\u003eThe DCC94 is a large 8 pin decoder which is fitted with a removable 25mm harness including 2 function wires. Fitted in the decoder is a small 2 pin socket which can have the PowerPal inserted into it (sold seperately), This helps keep the locomotive moving in dirty or dead track sections.\u003c\/p\u003e  \u003ch3\u003eFEATURES\u003c\/h3\u003e  \u003cul class=\"\" gm-list\u003e  \u003cli\u003e2 Digit and 4 Digit Addressing\u003c\/li\u003e  \u003cli\u003e14, 28 or 128 Speed Steps\u003c\/li\u003e  \u003cli\u003eSmooth Operation\u003c\/li\u003e  \u003cli\u003eConstant Brightness Lighting\u003c\/li\u003e  \u003cli\u003eDirect Mode Programming\u003c\/li\u003e  \u003cli\u003eMotor Isolation Protection\u003c\/li\u003e  \u003cli\u003eAdvanced Consisting\u003c\/li\u003e  \u003cli\u003eSocket to Add PowerPal\u003c\/li\u003e  \u003c\/ul\u003e  \u003cbr\u003e  \u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e  \u003ctable id=\"\" product-attribute-specs-table class=\"\" data-table gm-retail-table\u003e  \u003ctbody\u003e  \u003ctr class=\"\" first odd\u003e\n\u003cth class=\"\" label\u003eNO. OF PINS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e8\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" even\u003e\n\u003cth class=\"\" label\u003eNO. OF FUNCTIONS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e6\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" odd\u003e\n\u003cth class=\"\" label\u003eSPEED STEPS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e14, 28 or 128\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" even\u003e\n\u003cth class=\"\" label\u003eCURRENT RATING\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e0.5A\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" last odd\u003e\n\u003cth class=\"\" label\u003eMOTOR CURRENT RATING\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e1.5A - 2.0A Max\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cbr\u003e  \u003ch3\u003eMEASUREMENTS\u003c\/h3\u003e  \u003ctable id=\"\" product-attribute-specs-table class=\"\" data-table gm-retail-table\u003e  \u003ctbody\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eLENGTH\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e27mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eWIDTH\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e17mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eTHICKNESS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e7mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eHARNESS LENGTH\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e25mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e","brand":"Gaugemaster","offers":[{"title":"Default Title","offer_id":56355783901564,"sku":"DCC94","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/DCC94_20Gaugemaster_20Ruby_20Series_206fn_20Pro_20DCC_208_20Pin_20Decoder.jpg?v=1786092538"},{"product_id":"dcc95-gaugemaster-ruby-series-6fn-pro-dcc-21-pin-decoder","title":"DCC95 Gaugemaster Ruby Series 6fn Pro DCC 21 Pin Decoder","description":"\u003cp\u003eDCC95 Gaugemaster Ruby Series 6fn Pro DCC 21 Pin Decoder. \u003c\/p\u003e  \u003cp\u003eThe DCC95 is a direct plug 21 pin decoder. Fitted in the decoder is a small 2 pin socket which can have the PowerPal inserted into it (sold seperately), This helps keep the locomotive moving in dirty or dead track sections.\u003c\/p\u003e  \u003ch3\u003eFEATURES\u003c\/h3\u003e  \u003cul class=\"\" gm-list\u003e  \u003cli\u003e2 Digit and 4 Digit Addressing\u003c\/li\u003e  \u003cli\u003e14, 28 or 128 Speed Steps\u003c\/li\u003e  \u003cli\u003eSmooth Operation\u003c\/li\u003e  \u003cli\u003eConstant Brightness Lighting\u003c\/li\u003e  \u003cli\u003eDirect Mode Programming\u003c\/li\u003e  \u003cli\u003eMotor Isolation Protection\u003c\/li\u003e  \u003cli\u003eAdvanced Consisting\u003c\/li\u003e  \u003cli\u003eSocket to Add PowerPal\u003c\/li\u003e  \u003c\/ul\u003e  \u003cbr\u003e  \u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e  \u003ctable id=\"\" product-attribute-specs-table class=\"\" data-table gm-retail-table\u003e  \u003ctbody\u003e  \u003ctr class=\"\" first odd\u003e\n\u003cth class=\"\" label\u003eNO. OF PINS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e21\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" even\u003e\n\u003cth class=\"\" label\u003eNO. OF FUNCTIONS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e6\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" odd\u003e\n\u003cth class=\"\" label\u003eSPEED STEPS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e14, 28 or 128\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" even\u003e\n\u003cth class=\"\" label\u003eCURRENT RATING\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e0.5A\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr class=\"\" last odd\u003e\n\u003cth class=\"\" label\u003eMOTOR CURRENT RATING\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e1.5A - 2.0A Max\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e  \u003cbr\u003e  \u003ch3\u003eMEASUREMENTS\u003c\/h3\u003e  \u003ctable id=\"\" product-attribute-specs-table class=\"\" data-table gm-retail-table\u003e  \u003ctbody\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eLENGTH\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e21mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eWIDTH\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e16mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003ctr\u003e\n\u003cth class=\"\" label\u003eTHICKNESS\u003c\/th\u003e  \u003ctd class=\"\" data last\u003e4mm\u003c\/td\u003e  \u003c\/tr\u003e  \u003c\/tbody\u003e  \u003c\/table\u003e","brand":"Gaugemaster","offers":[{"title":"Default Title","offer_id":56355783934332,"sku":"DCC95","price":35.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/DCC95_20Gaugemaster_20Ruby_20Series_206fn_20Pro_20DCC_2021_20Pin_20Decoder_ad732c3e-d02c-4c36-80e8-4e0c57ee2bee.jpg?v=1786092538"},{"product_id":"36-569a-bachmann-class-90-dcc-loco-decoder-21-pin","title":"36-569A Bachmann Class 90 DCC Loco-Decoder 21 Pin","description":"36-569A Bachmann Class 90 DCC Loco-Decoder with Servo Motor Operation \u0026amp; Brake function\u003cbr\u003e  \u003cp\u003eA 21 Pin (21MTC) DCC Decoder configured for use in the Bachmann Branchline Class 90 – \u003cspan\u003emodels produced from 2021 onwards\u003c\/span\u003e. Configured to control the servo-motor-operated Pantograph.\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eHighlights include:\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eDual-mode DCC\/DC decoder with Back EMF function\u003c\/p\u003e  \u003cp\u003e1.2A continuous load\u003c\/p\u003e  \u003cp\u003eBrake Button function for realistic control of braking\u003c\/p\u003e  \u003cp\u003eControls the servo-motor-operated Pantograph\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eDefault Functions when fitted to Bachmann Branchline Class 90\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eF0 - Direction Lights on\/off\u003c\/p\u003e  \u003cp\u003eF1 - Cab Lights (Directional) on\/off\u003c\/p\u003e  \u003cp\u003eF2 - Brake Button\u003c\/p\u003e  \u003cp\u003eF3 - Day\/Night Mode\u003c\/p\u003e  \u003cp\u003eF4 - Direction Lights Off (Non-Pantograph End)\u003c\/p\u003e  \u003cp\u003eF5 - Direction Lights Off (Pantograph End)\u003c\/p\u003e  \u003cp\u003eF6 - Pantograph Up\/Down\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eOperating Modes\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eNMRA\/DCC with 14, 28 and 128 speed steps\u003c\/p\u003e  \u003cp\u003eShort and Long addresses\u003c\/p\u003e  \u003cp\u003eDCC and DC operation (DC operation is de-selectable)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eMotor Control Features\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e1.2A continuous load\u003c\/p\u003e  \u003cp\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003c\/p\u003e  \u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eFunction Outputs\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003ePre-configured to operate lights and servo-motor-controlled Pantograph\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eDimensions\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e20.5mm x 15.5mm x 3.5mm\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eDefault Address\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eAddress 3\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eProgramming\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eAdditional Features\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eRailCom® Feedback system\u003c\/p\u003e  \u003cp\u003eCapacitor connections\u003c\/p\u003e  \u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by Zimo. For full technical specifications and instructions, please refer to the Zimo user guide for MX634C at \u003c\/em\u003e\u003ca href=\"\" http:\u003e\u003cspan\u003ehttp:\/\/www.zimo.at\/web2010\/documents\/MX-small-decoders_EN.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355788849532,"sku":"36-569A","price":38.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/36-569A.._9979e179-3f3f-4f46-9187-23c0fa93d468.jpg?v=1786091843"},{"product_id":"36-571-bachmann-6-pin-micro-dcc-loco-decoder","title":"36-571 Bachmann 6 Pin Micro DCC Loco-Decoder","description":"36-571 Bachmann 6 Pin Micro DCC Loco-Decoder (with Brake Button function)\u003cbr\u003e  \u003cp\u003eA 6 Pin (NEM651) DCC Decoder suitable for models fitted with a 6 Pin DCC decoder socket and where minimal space is available for the decoder, for instance the Graham Farish Class N Scale 03 and 04 Diesel Shunters and the Bachmann Narrow Gauge OO9 Scale Quarry Hunslets.\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eHighlights include:\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol and DC Analogue) with Back EMF function\u003c\/p\u003e  \u003cp\u003e6 powered function outputs\u003c\/p\u003e  \u003cp\u003e0.7A continuous load\u003c\/p\u003e  \u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e  \u003cp\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eOperating Modes\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol and DC Analogue) with Back EMF function\u003c\/p\u003e  \u003cp\u003e14, 28 and 128 speed steps\u003c\/p\u003e  \u003cp\u003eShort and Long addresses\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eMotor Control Features\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e  \u003cp\u003e0.7A continuous load\u003c\/p\u003e  \u003cp\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003c\/p\u003e  \u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eFunction Outputs\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e6 powered-function outputs with overload protection (4 outputs connect via solder pads)\u003c\/p\u003e  \u003cp\u003e500mA load per output\u003c\/p\u003e  \u003cp\u003e500mA total load of all function outputs\u003c\/p\u003e  \u003cp\u003eShunting speed and momentum key selectable\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eDimensions\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e8mm x 8mm x 2.4mm\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eDefault Address\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eAddress 3\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eProgramming\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eAdditional Features\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eRailCom® Feedback system\u003c\/p\u003e  \u003cp\u003eUpgradable firmware\u003c\/p\u003e  \u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by Zimo. For full technical specifications and instructions, please refer to the Zimo user guide for MX616N at \u003c\/em\u003e\u003ca href=\"\" http:\u003e\u003cspan\u003ehttp:\/\/www.zimo.at\/web2010\/documents\/MX-small-decoders_EN.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355788882300,"sku":"36-571","price":46.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/36-571..jpg?v=1786091844"},{"product_id":"dcd-zn8h-2-dcc-concepts-zen-black-decoder-super-thin-nano-8-pin","title":"DCD-ZN8H.2 DCC Concepts Zen Black Decoder: Super THIN NANO 8 Pin","description":"\u003cp\u003eDCD-ZN8H.2 DCC Concepts Zen Black Decoder: Super THIN NANO 8 Pin with harness – 2 Function\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":56355810902396,"sku":"DCD-ZN8H.2","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/DCD-ZN8H.2_61c7782c-95a9-4a88-97d9-a1491b5055bb.jpg?v=1786092541"},{"product_id":"aed-21pd-4-2-dcc-concepts-ae-model-21-pin-direct-6-func-decoder","title":"AED-21PD.4.2 DCC Concepts AE Model 21 Pin Direct 6 Func Decoder","description":"\u003cp\u003eAED-21PD.4.2 DCC Concepts AE Model 21-Pin Direct 6 Function Decoder \u003cspan\u003e(4 powered \/ 2 logic)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eAll AE decoders conform to NMRA and NEM standards. They are produced to the highest quality standards. They also include many unique features and are tailored to give best performance straight from the box.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":56355811033468,"sku":"AED-21PD.6","price":19.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/AED-21PD.4.2.jpg?v=1786092438"},{"product_id":"dcd-znmini-4-dcc-concepts-zen-black-decoder-mini-8-pin-harness","title":"DCD-ZNmini.4 DCC Concepts Zen Black Decoder: Mini 8 Pin Harness","description":"\u003cp\u003eDCD-ZNmini.4 DCC Concepts Zen Black Decoder: Mini 8 Pin Harness 4 Function\u003cbr\u003e\u003cbr\u003eZen decoder software has always been smooth, clever and easy to use. The BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection. All of these decoders are tested at least 3 times before they are packaged for sale. The DCD-ZNmini.4 replaces the previous version – DCD-Zmini\u003c\/p\u003e  \u003cp\u003eDecoder features: – 1.1 Amps peak power – 750mA continuous power – 4 functions at 100mA each – 19mm x 11mm x 6mm – 8-pin \u0026amp; harness – One-Step Loco Setup – Shuttle mode (requires ABC boards for this to function) – Brown-Out Protection on-board – Stay-Alive connection\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":56355811099004,"sku":"DCD-ZNmini.4","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/ZNMINI-No-Harness-2-cut-scaled_635ea7c8-0465-4e41-adaf-20168b5082da.jpg?v=1786092540"},{"product_id":"dcd-zn8d-4-dcc-concepts-zen-blue-decoder-8-pin-nano-direct","title":"DCD-ZN8D.4 DCC Concepts Zen Blue+ Decoder: 8 Pin NANO Direct","description":"\u003cp\u003eDCD-ZN8D.4 DCC Concepts Zen Blue+ Decoder: 8 Pin NANO Direct – 4 Fn\u003cbr\u003e\u003cbr\u003eZen decoder software has always been smooth, clever and easy to use but this decoder range takes this to a new level, with super-advanced brown-out protection and nano size. \u003cbr\u003e\u003cbr\u003eAll of the decoders are tested at least 3 times before being packaged for sale so you can be quite confident that reliability is assured. DCD-ZN8D.4 replaces the previous version – DCD-ZN8D.\u003c\/p\u003e  \u003cp\u003eDecoder features: \u003cbr\u003e– 1.1 Amps peak power \u003cbr\u003e– 750mA continuous power \u003cbr\u003e– 4 functions at 100mA each \u003cbr\u003e– 15mm x 7mm x 5mm (excluding pins)\u003cbr\u003e– 8-pin direct \u003cbr\u003e– Brown-out protection\u003cbr\u003e – Stay-alive connection\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":56355811262844,"sku":"DCD-ZN8D.4","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/DCD-ZN8D.4_c32bafe6-6fa4-4ba7-9e31-18cc55efa9c2.jpg?v=1786092540"},{"product_id":"dcd-8pdm-3-dcc-concepts-decoder-harness-8-pin-female-200mm","title":"DCD-8PDM.3 DCC Concepts Decoder Harness 8 Pin Female (200mm)","description":"\u003cp\u003eDCD-8PDM.3 DCC Concepts Decoder Harness 8 Pin Female (200mm) (3 Pack)\u003cbr\u003e\u003cbr\u003eA pack of three 8 pin harnesses with a female socket to connect to NEM652\/NMRA 8 pin decoders. Colour coded wiring to match MOROP\/NMRA standards for 2 lighting functions.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":56355811328380,"sku":"DCD-8PDM.3","price":13.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/dcc-8pf3-content-w_09eeda01-5e71-4b66-a353-647640d33c7d.jpg?v=1786092539"},{"product_id":"aed-6pd-2-dcc-concepts-ae-model-6-pin-direct-2-func-decoder","title":"AED-6PD.2 DCC Concepts AE Model 6 Pin Direct 2 Func Decoder","description":"\u003cp\u003eAED-6PD.2 DCC Concepts AE Model 6-Pin Direct 2 Function Decoder\u003cbr\u003e\u003cbr\u003eAll AE decoders conform to NMRA and NEM standards. They are produced to the highest quality standards. They also include many unique features and are tailored to give best performance straight from the box.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":56355811393916,"sku":"AED-6PD.2","price":19.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/AED-6PD_02211bad-1aac-4b02-ba4d-f38e6d42a00f.jpg?v=1786092438"},{"product_id":"dcd-zn8h-nano-dcc-concepts-zen-blue-decoder-8-pin-nano-wired","title":"DCD-ZN8H.nano DCC Concepts Zen Blue+ Decoder: 8 Pin NANO Wired","description":"\u003cp\u003eDCD-ZN8H.nano DCC Concepts Zen Blue+ Decoder: 8 Pin NANO Wired 2 Function\u003cbr\u003e\u003cbr\u003eZen NANO 8 Pin Wired 2 Function w\/Stay Alive connection.\u003c\/p\u003e  \u003cp\u003eThe ZN8H.nano is remarkably small!\u003c\/p\u003e  \u003cp\u003eDecoder features: \u003cbr\u003e– 1.1 Amps peak power \u003cbr\u003e– 750mA continuous power \u003cbr\u003e– 2 functions at 100mA each \u003cbr\u003e– 14mm x 7mm x 2.7mm\u003cbr\u003e – 8-pin harness \u003cbr\u003e– Brown-out protection \u003cbr\u003e– Stay-alive connection\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":56355811492220,"sku":"DCD-ZN8H.nano","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/ZN8H_051e7ee0-1419-48f3-8fe5-fb59e7e949ae.jpg?v=1786092541"},{"product_id":"36-570a-bachmann-plux-22-decoder-nem658","title":"36-570A Bachmann PluX 22 Decoder NEM658","description":"36-570A Bachmann PluX 22 Decoder NEM658.\u003cbr\u003e  \u003cp\u003eA Plux22 (NEM658) DCC Decoder suitable for models fitted with a Plux22 DCC decoder socket.\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eHighlights include:\u003c\/span\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin)) with Back EMF function\u003c\/li\u003e  \u003cli\u003e11 function outputs (9 powered and 2 logic level)\u003c\/li\u003e  \u003cli\u003e1.2A continuous load\u003c\/li\u003e  \u003cli\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/li\u003e  \u003cli\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eOperating Modes\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin)) with Back EMF function\u003c\/li\u003e  \u003cli\u003e14, 28 and 128 speed steps\u003c\/li\u003e  \u003cli\u003eShort and Long addresses\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eMotor Control Features\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/li\u003e  \u003cli\u003e1.2A continuous load\u003c\/li\u003e  \u003cli\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003c\/li\u003e  \u003cli\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eFunction Outputs\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e9 powered-function outputs with overload protection\u003c\/li\u003e  \u003cli\u003e800mA load per output\u003c\/li\u003e  \u003cli\u003e800mA total load of all function outputs\u003c\/li\u003e  \u003cli\u003e2 additional logic level outputs\u003c\/li\u003e  \u003cli\u003eShunting speed and momentum key selectable\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eDimensions\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003e22mm x 15mm x 3.5mm\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eDefault Address\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eAddress 3\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eProgramming\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eAdditional Features\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eRailCom® Feedback system\u003c\/li\u003e  \u003cli\u003eCapacitor connections\u003c\/li\u003e  \u003cli\u003eUpgradable firmware\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by Zimo. For full technical specifications and instructions, please refer to the Zimo user guide for MX633P22 at \u003c\/em\u003e\u003ca href=\"\" http:\u003e\u003cspan\u003e\u003cem\u003ewww.zimo.at\/web2010\/documents\/MX-KleineDecoder_E.pdf\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355822371196,"sku":"36-570A","price":33.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/36-570A.jpg?v=1786091842"},{"product_id":"imperium6-dapol-imperium-plux22-dcc-decoder-with-8-functions","title":"Imperium6 Dapol Imperium PluX22 DCC Decoder with 8 functions","description":"\u003cp\u003eImperium6 Dapol Imperium PluX 22 DCC Decoder with 8 functions.\u003c\/p\u003e","brand":"Dapol","offers":[{"title":"Default Title","offer_id":56355843965308,"sku":"IMPERIUM6","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/230209_20DAPOL_20IMPERIUM6_20PLUX22_1_e5f2173f-9254-4a53-af78-2111f74700d5.jpg?v=1786092650"},{"product_id":"r7322-hornby-hm7000-21txs-bluetooth-sound-decoder-21-pin","title":"R7322 Hornby HM7000-21TXS: Bluetooth Sound Decoder 21 Pin","description":"R7322 Hornby HM7000-21TXS: Bluetooth® \u0026amp; DCC Sound Decoder (21-pin)  \u003cp\u003e\u003cspan\u003ePart of the innovative new HM7000 range, this 21-pin Bluetooth® and DCC sound decoder is perfect for getting newer 21-pin Hornby locomotives working on the HM7000 system. This decoder also has sound capabilities, the perfect pairing to a loco with a pre-fitted speaker or even for locomotives that can fit a small external sugar cube speaker.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":56355851993468,"sku":"R7322","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/R7322_74ee7f09-a44b-472d-97dd-d4d34e8fac02.jpg?v=1786092882"},{"product_id":"36-566a-bachmann-8-pin-dcc-decoder-railcomplus-compliant","title":"36-566A Bachmann 8 Pin DCC Decoder RailComPlus Compliant","description":"\u003cp\u003e36-566A Bachmann 8 Pin DCC Decoder 0.9 Amp 4 Function RailComPlus Compliant. \u003c\/p\u003e  \u003cp\u003eA 8 Pin (NEM652) DCC Decoder suitable for models fitted with a 8 Pin DCC decoder socket\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eHighlights include:\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eDual-mode DCC\/DC decoder with Back EMF function\u003c\/p\u003e  \u003cp\u003e4 powered function outputs\u003c\/p\u003e  \u003cp\u003e0.9A continuous load\u003c\/p\u003e  \u003cp\u003eRailComPlus® for automatic registration on Dynamis Ultima\u003c\/p\u003e  \u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eOperating Modes\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eNMRA\/DCC with 14, 28 and 128 speed steps\u003c\/p\u003e  \u003cp\u003eShort and Long addresses\u003c\/p\u003e  \u003cp\u003eDCC and DC operation (DC operation is de-selectable)\u003c\/p\u003e  \u003cp\u003eAutomatic recognition of operational mode and DCC speed step selection\u003c\/p\u003e  \u003cp\u003eSupports Lenz® LG 100 braking sections\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eMotor Control Features\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e  \u003cp\u003e0.9A continuous load\u003c\/p\u003e  \u003cp\u003eSilent \u0026amp; safe 20kHz pulse width frequency motor regulation\u003c\/p\u003e  \u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eFunction Outputs\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e4 powered-function outputs with overload protection\u003c\/p\u003e  \u003cp\u003e250mA load per output\u003c\/p\u003e  \u003cp\u003e500mA total load of all function outputs\u003c\/p\u003e  \u003cp\u003eShunting speed and momentum key selectable\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eDimensions\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e25.5mm x 15.5mm x 4.5mm (+ wiring harness)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eDefault Address\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eAddress 3\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eProgramming\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eAdditional Features\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eRailCom® Feedback system\u003c\/p\u003e  \u003cp\u003eRailComPlus® automatic Registration\u003c\/p\u003e  \u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by ESU. For full technical specifications and instructions, please refer to the ESU user guide for Lokpilot Standard 53611 at \u003cspan\u003e\u003ca href=\"\" https:\u003ewww.esu.eu\/en\/products\/former-products\/lokpilot-standard\/\u003c\/a\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355859399036,"sku":"36-566A","price":31.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/36-566A_804985ec-5924-40c2-8dae-a9da9969bfa3.jpg?v=1786091842"},{"product_id":"36-557a-bachmann-1-amp-4-function-dcc-decoder-21-pin-plug","title":"36-557A Bachmann 1 amp 4 function DCC decoder 21 pin Plug","description":"36-557A Bachmann 0.9 amp 4 function DCC decoder 21-pin Plug with back emf.  \u003cp\u003eA 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569 with these models).\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003eHighlights include:\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eDual-mode DCC\/DC decoder with Back EMF function\u003c\/p\u003e  \u003cp\u003e4 powered function outputs (+2 logic level outputs)\u003c\/p\u003e  \u003cp\u003e0.9A continuous load\u003c\/p\u003e  \u003cp\u003eRailComPlus® for automatic registration on Dynamis Ultima\u003c\/p\u003e  \u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eOperating Modes\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eNMRA\/DCC with 14, 28 and 128 speed steps\u003c\/p\u003e  \u003cp\u003eShort and Long addresses\u003c\/p\u003e  \u003cp\u003eDCC and DC operation (DC operation is de-selectable)\u003c\/p\u003e  \u003cp\u003eAutomatic recognition of operational mode and DCC speed step selection\u003c\/p\u003e  \u003cp\u003eSupports Lenz® LG 100 braking sections\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eMotor Control Features\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e  \u003cp\u003e0.9A continuous load\u003c\/p\u003e  \u003cp\u003eSilent \u0026amp; safe 20kHz pulse width frequency motor regulation\u003c\/p\u003e  \u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eFunction Outputs\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e4 powered function outputs with overload protection\u003c\/p\u003e  \u003cp\u003e250mA load per output\u003c\/p\u003e  \u003cp\u003e500mA total load of all function outputs\u003c\/p\u003e  \u003cp\u003e2 additional logic outputs\u003c\/p\u003e  \u003cp\u003eShunting speed and momentum key selectable\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eDimensions\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003e25.5mm x 15.5mm x 4.5mm\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eDefault Address\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eAddress 3\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eProgramming\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e  \u003cp\u003e\u003cspan\u003e\u003cspan style=\"\" text-decoration: underline\u003eAdditional Features\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  \u003cp\u003eRailCom® Feedback system\u003c\/p\u003e  \u003cp\u003eRailComPlus® automatic Registration\u003c\/p\u003e  \u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by ESU. For full technical specifications and instructions, please refer to the ESU user guide for Lokpilot Standard 53614 at \u003cspan\u003e\u003ca href=\"\" https:\u003ewww.esu.eu\/en\/products\/former-products\/lokpilot-standard\/\u003c\/a\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":56355859431804,"sku":"36-557A","price":35.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/36-557A_8cf5dc77-27b3-426e-a3c9-7cd17636ed82.jpg?v=1786091841"},{"product_id":"imperium7-dapol-imperium-21-pin-non-mtc-dcc-decoder-6-func","title":"Imperium7 Dapol Imperium 21 Pin non MTC DCC Decoder 6 func","description":"Imperium7 Dapol Imperium 21 Pin non MTC DCC Decoder with 6 functions\u003cbr\u003e\u003cbr\u003eThis decoder is recommended for steam locos or models without working directional lighting\u003cbr\u003e\u003cbr\u003e","brand":"Dapol","offers":[{"title":"Default Title","offer_id":56355865395580,"sku":"IMPERIUM7","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/WEB_20230519_20DAPOL_20IMPERIUM7_1_4d2287aa-10d7-4463-8fb2-dc118ce96617.jpg?v=1786092651"},{"product_id":"53900-esu-decoder-tester","title":"53900 ESU Decoder Tester","description":"53900 ESU Decoder Tester\u003cbr\u003e  \u003cp class=\"\" bodytext\u003ePerhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how to do this?\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe Profi Decoder tester makes it easy for you: simply connect the tester to your command station or the LokProgrammer. It enables you to test any decoder without exposing it to any external factors caused by the locomotive that may influence its performance.\u003c\/p\u003e  \u003ch2\u003eFeatures\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eIn order to make things as easy as possible for you, the Profi Decoder Tester is equipped with some useful features. It has all commonly used interface sockets for connecting a decoder for the smaller scale models:\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eBesides a 6-pole NEM 651 socket and the 8-pole NEM 652 socket, it also has an 21MTC interface as per NEM 660, a PluX22 socket as well as a Next18 interface: No matter which type of decoder you have: Simply plug it in – it will fit! And that’s all there is to it!\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eDecoders without any interface can be contacted with individual terminals. \u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eA quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output: Thus it is quite easy to check on the low speed performance and the even speed of the decoder. An LED monitor informs you about the functioning of the headlights and back-up lights as well as the function outputs AUX1 through AUX6.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eFor testing LokSound decoders we have integrated a 20 mm speaker. You may choose if the integral speaker should be switched off or if it should have 100 Ohm respectively 16 Ohm – thus the Decoder Tester is perfectly suitable for any ESU decoder generation!\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eTwo SUSI plugs facilitate the direct test of optional SUSI modules as well as the connection to another circuit board.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe electrical connection to either the command station or the LokProgrammer is facilitated by a removable, 2-pole terminal block (same system as used on the LokProgrammer and the ECoS) or via two solder points.\u003c\/p\u003e  \u003ch2\u003eExtension\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eNow there is an extension board that enables you to also connect our large scale decoders to the Decoder Tester. With this vast range of components your Profi Decoder Tester will soon be an indispensable aid in your workshop!\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":56355968680316,"sku":"53900","price":47.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/53900_20ESU_20Decoder_20Tester.jpg?v=1786092111"},{"product_id":"53901-esu-decoder-tester-extension-for-loksound","title":"53901 ESU Decoder Tester Extension for LokSound","description":"53901 ESU Decoder Tester Extension, for LokSound XL V4, LokSound L V4\u003cbr\u003e  \u003cp class=\"\" bodytext\u003eIf necessary, you can add the Decoder Tester Extension to your Profi Decoder Tester: Plugged into the side of the Decoder Tester it enables you to comfortably test all large scale decoders.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eIf you also have to deal with large scale LokSound XL or LokSound L decoders in your workshop, the Profi Decoder Tester Extension is just the right thing for you: You can plug on LokSound XL decoders with multi-pin connectors as well as LokSound L decoders directly and easily test them.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe extension module has multi-pin connectors for direct plug-on of the decoder types mentioned above. An LED monitor with 12 LEDs displays the status of all physical function outputs.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eYou may also plug on a second speaker or sensor inputs onto the multi-pin connector for quick and easy testing. Up to four servos may also be plugged on for direct testing.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eEspecially for the LokSound L, connecting pins for a smoke generator have also been added.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe Profi Decoder Tester Extension represents the perfect test and programming bench in conjunction with the Profi Decoder Tester, where you can test and program almost all (ESU) decoders quickly and easily.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":56355968713084,"sku":"53901","price":23.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/3048\/7164\/files\/53901_20ESU_20Decoder_20Tester_20Extension_20for_20LokSound_d0b79b53-7f9d-4c4b-a93b-7cd55b24c0ff.jpg?v=1786092111"},{"product_id":"58410-esu-loksound-5-dcc-mm-sx-s4-blank-decoder-8-pin-nem652","title":"58410 ESU LokSound 5 DCC\/MM\/SX\/S4 Blank Decoder 8 Pin NEM652","description":"58410 ESU LokSound 5, DCC\/MM\/SX\/S4, Blank Decoder, 8 Pin, NEM652, with 11mmx15mm Speaker \u0026amp; Power Pack leads\u003cbr\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eLokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. \u003cspan\u003ePlease note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/span\u003e\u003c\/p\u003e  \u003ch2\u003eOperating modes\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eLike all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/p\u003e  \u003ch2\u003eSound\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/p\u003e  \u003ch2\u003eFunctions\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eWe are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.\u003c\/p\u003e  \u003ch2\u003eMotor control\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eMotor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.\u003c\/p\u003e  \u003ch2\u003eLokSound 5 DCC\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":56355968844156,"sku":"58410","price":95.99,"currency_code":"GBP","in_stock":true}]},{"product_id":"58412-esu-loksound-5-dcc-mm-sx-s4-blank-decoder-plux22","title":"58412 ESU LokSound 5 DCC\/MM\/SX\/S4 Blank Decoder PluX22","description":"58412 ESU LokSound 5, DCC\/MM\/SX\/S4, Blank Decoder, PluX22, with 11mmx15mm Speaker\u003cbr\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eLokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. \u003cspan\u003ePlease note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/span\u003e\u003c\/p\u003e  \u003ch2\u003eOperating modes\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eLike all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/p\u003e  \u003ch2\u003eSound\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/p\u003e  \u003cp class=\"\" bodytext\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/p\u003e  \u003ch2\u003eFunctions\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eWe are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.\u003c\/p\u003e  \u003ch2\u003eMotor control\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eMotor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.\u003c\/p\u003e  \u003ch2\u003eLokSound 5 DCC\u003c\/h2\u003e  \u003cp class=\"\" bodytext\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":56355968876924,"sku":"58412","price":92.99,"currency_code":"GBP","in_stock":true}]}],"url":"https:\/\/www.kernowmodelrailcentre.com\/collections\/decoders.oembed?page=2","provider":"Kernow Model Rail Centre","version":"1.0","type":"link"}